Thats pretty damn spiffy...
I have a similar clear coat peeling problem on the top of passenger side fender, where it meets the hood. Three separate spots down the fender actually
. Looking to avoid spending $$$ to get it fixed b/c I'm a poor college student, and figure I'd get some quality time w/ the car by doing it myself. Don't want showcar quality stuff, just enough so that it doesn't detract from the overall look of the car.
Can you go over real quick how you got that result? Heres what I gathered:
-Wet sand w/ 1500grit in circular motion, trying to get it so that the clear coat thats there stops pealing
-Apply some clear-coat-in-a-can to the area (what kind/brand did you use?). Did you tape it off precisely or leave some room for it to overlap w/ clearcoat thats still there?
-Wet sand again, and then buff?
Any other tips or advice from your experience? I don't have access to buffing tools, how did it look after the last round of wet sanding?
May have found myself a project for the weekend!
Always fun to make the 'stang look more perty!