Hi,
I recently changed my front control arms, springs and inner & outer tie rods.
I took my 03 mach1 for a test drive and noticed when pulling the wheel hard to left / right. I can hear a single loud knock on the front driver side.
Everything was torqued to spec, and springs were aligned inbetween the 2 holes on the lca. insulator was fine. Rack bushings and stabilizer links are 2 years old.
What would you recommend i check first?
Front and Rear alignment is in a few weeks,
It sounds like its coming from the red section in the picture, not the strut mount
I recently changed my front control arms, springs and inner & outer tie rods.
I took my 03 mach1 for a test drive and noticed when pulling the wheel hard to left / right. I can hear a single loud knock on the front driver side.
Everything was torqued to spec, and springs were aligned inbetween the 2 holes on the lca. insulator was fine. Rack bushings and stabilizer links are 2 years old.
What would you recommend i check first?
Front and Rear alignment is in a few weeks,
It sounds like its coming from the red section in the picture, not the strut mount
Attachments
Last edited: