Looking for a stud..

[Mstng93SSP]

I would imagine with my title, @Noobz347 will be here any minute now, however that is not what I am looking for. I have been searching everywhere for rear wheel studs that are 2 1/2 inches long. I see 3 inch, or stock length. Anyone have or know of 2 1/2 inch rear wheel studs?

Thanks

 

[General karthief]

• Forums
• Mustang Forums
• 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Looking for a stud..​

• Thread starterMstng93SSP
• Start date8 minutes ago
• TagsNone

Well that's what you wrote!
Anyway, you may have to cut down some 3" .
Have you looked at ARP?

 

[Mstng93SSP]

ARP does list a set at $110....that's a little out of my price range....

 

[Noobz347]

2.3 inches

https://www.oreillyauto.com/detail/c/dorman-autograde/dorman-autograde-1-2-20-inch-thread-wheel-lug/dag0/610523/v/a/18368/automotive-car-2005-ford-mustang?q=wheel+stud+2.5+inch&pos=9

...and I found you this:

He says he's the full 2.5.

 

[Mstng93SSP]

Sorry, should have clarified. Looking for rear which is a 0.625 knurl. The dude you posted @Noobz347 has too small of a knurl.

 

[Noobz347]

Sorry, should have clarified. Looking for rear which is a 0.625 knurl. The dude you posted @Noobz347 has too small of a knurl.

Check the Oreily's website. They have a lot of oddballs. You might find something very close.

 

[Mustang5L5]

So you're looking for a 2.5" long stud eh??

 

[Mstng93SSP]

So you're looking for a 2.5" long stud eh??

Aren't we all.....

 

[AeroCoupe]

Give Moser a call and see if they have 2.5" and just are not advertising them. They have the 3" for a really good price so they might just have the 2.5"

Part # 8010 - 1/2" - 20 X 3" .625 Knurl - Moser Engineering

Part # 8010 - 1/2" - 20 X 3" .625 Knurl 1/2' - 20 x 3' , .625 knurl, Press-In Grade 8 Wheel Stud. set of 10

www.moserengineering.com

 

[Mstng93SSP]

Moser said they only have a 3 inch.

 

[Noobz347]

Damn...

All I've got for ya is some motivational music to help your search:



View: https://youtu.be/A_HjMIjzyMU?si=uB59SSygSmBDDUSr&t=48



Nevermind the video part. It came with the song

 

[nickyb]

I used a dremel with cut off disc,trimmed em down and shaped em round tips.
did this so i could get center caps on.

 

[85GTStangGuy]

View: https://youtu.be/A_HjMIjzyMU?si=uB59SSygSmBDDUSr&t=48

Damn it!
It ended at the best part.
What happens next??

 

[General karthief]

Damn it!
It ended at the best part.
What happens next??

Everybody dies!!!

 

[Noobz347]

Everybody dies!!!

Covid

 

[TOOLOW91]

ARP does list a set at $110....that's a little out of my price range....

That’s really not bad for good wheel studs . That’s what I have on mine they fit under the center caps of my 17 inch pony’s

 

[Mstng93SSP]

That’s really not bad for good wheel studs . That’s what I have on mine they fit under the center caps of my 17 inch pony’s

I have seen your car...it deserves $110 wheel studs. Mine.....not so much.

 

[TOOLOW91]

I have seen your car...it deserves $110 wheel studs. Mine.....not so much.

I mean your cars are pretty damn sweet dude !

 

[Mstng93SSP]

Thanks.