- Feb 13, 2018
- 12
- 0
- 1
hopefully somebody can point me in the right direction. So over the past month are so I installed trick flow twisted wedge 170 heads along with and Anderson n-41 camshaft in my 93 cobra. I had matt moss port my lower cobra intake to match the heads. Here’s where I’m stumped.. I took the car to alternative auto to have it dyno tuned and after a couple hours of tinkering the car only made 218 rwhp.. I was told that either the Cam shaft was too big for my set up or that the Cam was not installed dot to dot which after pulling it back apart over the weekend was not the case..I did a compression test and all cylinders where within 140-160 psi cold.. any help would be greatly appreciated!