Hey guys/girls. New to this forum here, hopefully I can get some assistance from yall. So I have a 2009 Mustang GT Premium 5-spd. Not much done to it so far (all done myself):
K&N intake
Muffler delete
Billet grille w/hidden fogs - painted maroon (upper and lower)
Smoked head lights/turn sigs
HIDs (headlights/fogs) - 10k 55w headlights, 8k 35w fogs
So I am getting the itch, and finally have the money to do so, to lower it. I havent done much research but I know the gist about what it all entails. I was looking at going with:
http://bmrsuspension.com/index.cfm?page=products&vehicleid=1&catid=58&productid=995
BMR lower control arm relocation bracket
BMR lower control arm
http://bmrsuspension.com/index.cfm?page=products&vehicleid=1&catid=130&productid=1114
Koni Shocks
BMR lowering springs (1" front/1.25" rear)
http://bmrsuspension.com/index.cfm?page=products&vehicleid=1&catid=67&productid=139
Camber bolts
http://bmrsuspension.com/index.cfm?page=products&vehicleid=1&catid=69&productid=832
Ford Motorcraft upper strut mounts (Not sure why I need these though)
http://bmrsuspension.com/index.cfm?page=products&vehicleid=1&catid=68&productid=172
BMR on-car adjustable w/polyurethane bushings panhard bar
http://bmrsuspension.com/index.cfm?page=products&vehicleid=1&catid=62&productid=184
BMR front sway bar
http://bmrsuspension.com/index.cfm?page=products&vehicleid=1&catid=62&productid=185
BMR rear sway bar
http://bmrsuspension.com/index.cfm?page=products&vehicleid=1&catid=62&productid=186
BMR sway bar end links.
If I'm going to do it, I want to do it right. Maybe not with all the top of the line parts but I want it to be worth my while (and functional). I don't take it to the track too much, just run it every now and then. Any input or ideas (i.e. better parts/cheaper/not needed parts...) would be much appreciated! One last thing, I will be installing all of this my self at a local auto hobby shop (Air Force operate). Not looking for anything crazy, want to do a solid lowering job, and do it right.
Thanks in advance!
K&N intake
Muffler delete
Billet grille w/hidden fogs - painted maroon (upper and lower)
Smoked head lights/turn sigs
HIDs (headlights/fogs) - 10k 55w headlights, 8k 35w fogs
So I am getting the itch, and finally have the money to do so, to lower it. I havent done much research but I know the gist about what it all entails. I was looking at going with:
http://bmrsuspension.com/index.cfm?page=products&vehicleid=1&catid=58&productid=995
BMR lower control arm relocation bracket
BMR lower control arm
http://bmrsuspension.com/index.cfm?page=products&vehicleid=1&catid=130&productid=1114
Koni Shocks
BMR lowering springs (1" front/1.25" rear)
http://bmrsuspension.com/index.cfm?page=products&vehicleid=1&catid=67&productid=139
Camber bolts
http://bmrsuspension.com/index.cfm?page=products&vehicleid=1&catid=69&productid=832
Ford Motorcraft upper strut mounts (Not sure why I need these though)
http://bmrsuspension.com/index.cfm?page=products&vehicleid=1&catid=68&productid=172
BMR on-car adjustable w/polyurethane bushings panhard bar
http://bmrsuspension.com/index.cfm?page=products&vehicleid=1&catid=62&productid=184
BMR front sway bar
http://bmrsuspension.com/index.cfm?page=products&vehicleid=1&catid=62&productid=185
BMR rear sway bar
http://bmrsuspension.com/index.cfm?page=products&vehicleid=1&catid=62&productid=186
BMR sway bar end links.
If I'm going to do it, I want to do it right. Maybe not with all the top of the line parts but I want it to be worth my while (and functional). I don't take it to the track too much, just run it every now and then. Any input or ideas (i.e. better parts/cheaper/not needed parts...) would be much appreciated! One last thing, I will be installing all of this my self at a local auto hobby shop (Air Force operate). Not looking for anything crazy, want to do a solid lowering job, and do it right.
Thanks in advance!