Im thinking about getting a micro tuner to increase my hp and what not. I was trying to research and find out how much hp you could potentally gain anyone know, and get tell my if they are worth it.
Here is the Dyno sheet from Superchips with Bone stock and just reprogrammed.
Automatic
Max HP gain is 12.5 hp@3400rpm and Max Torq gain is 19.2 ft/lbs @ 3400rpm.
Peak HP gain is .6 hp@5300rpm and Peak Torq gain is 19.2 ft/lbs @ 3400rpm.
Manual
Max HP gain is 6.3 hp@4600rpm and Max Torq gain is 7.2 ft/lbs @ 4500rpm.
Peak HP gain is 5.2 hp@5200rpm and Peak Torq gain is 1.1 ft/lbs @ 3100rpm.
I would venture to guess that these are about the best they could get, with just the handheld micro.
I will check around for SCT X-Calibrator figures.
EDIT.. Even better... Here is the forum link for SCT...ask Ryan at SCT if there are any Dyno sheets available for a Bone Stock V-6.