- Jun 15, 2004
- 10
- 0
- 0
I've retired my 89 5.0 to the garage to do some work and wanted to check up and see if my choice of parts will work well together. I'm looking for a nice street car. I don't need a track car that can run 10s, most likely won't ever take it to the track, so just a ballsy cruiser I guess I could say. Some of these things are already on the car, but most I have still to get:
MAC shorty headers (already have on the car)
MAC exhaust from headers back (already on the car)
BBK Fenderwell cold air intake (already on the car)
BBK off-road H Pipe
Ported E7 heads (maybe GT40s if funds allow, but probably not)
e303 cam
1.7 rockers
New lifters
8.8 3.73 rear conversion
Cobra Intake (figured this was all i needed with the stock e7s)
(not sure which size throttle body)
My list evolves around my own choices and also my budget of course. There is more to this list such as ignition, new underdrive pullies, etc. It is open for critique since I have knowledge, but I'm not a technician/mechanic and this will be my first major project with my car.
MAC shorty headers (already have on the car)
MAC exhaust from headers back (already on the car)
BBK Fenderwell cold air intake (already on the car)
BBK off-road H Pipe
Ported E7 heads (maybe GT40s if funds allow, but probably not)
e303 cam
1.7 rockers
New lifters
8.8 3.73 rear conversion
Cobra Intake (figured this was all i needed with the stock e7s)
(not sure which size throttle body)
My list evolves around my own choices and also my budget of course. There is more to this list such as ignition, new underdrive pullies, etc. It is open for critique since I have knowledge, but I'm not a technician/mechanic and this will be my first major project with my car.