- Nov 11, 2005
- 317
- 0
- 0
Eh, another problem with the stang (not surprised). Ok I believe that a faulty pertronix flame coil is the culprit of my latest snafu. I came across a similar question from this site: MGB: Possible Pertronix Problems
MY QUESTION is how can I identify whether or not I have a 1.5 or 3 ohm coil? Or does it not matter because the coil should be receiving 3 ohms irregardless? I plan to make a trip to the local parts store to rent a multimeter and test my coil to see if its still working. Thanks!
*Just in case I wasnt clear* I just want to make sure which ohm coil I have so I know if the 1.5 or 3 so when I measure if its lower than what it should be operating at.
MY QUESTION is how can I identify whether or not I have a 1.5 or 3 ohm coil? Or does it not matter because the coil should be receiving 3 ohms irregardless? I plan to make a trip to the local parts store to rent a multimeter and test my coil to see if its still working. Thanks!
*Just in case I wasnt clear* I just want to make sure which ohm coil I have so I know if the 1.5 or 3 so when I measure if its lower than what it should be operating at.