Figured I'd post a update since I'm planning some more work soon. Few pics....
I'm sure someone will ask the track times I've been able to cut, and nothing really special. Just a 8.9 with a 2.1 60ft at around 83 MPH. For those who don't speak 1/8th around a high 13, have to forgive me 1/8th racing is huge here in DFW considering we have around 5 1/8th tracks.
Been driving/racing the car for a few
HOT months now. Car has been really good to me other then burning oil and the a/c not working. (Charged it but it all leaked out a bad O-ring.)
So this week I ordered a Leak Down Tester, a new a/c dryer, and a o-ring kit. Planning to yank the valve covers and see if I can figure out anything in regards to the oil the car is burning. About half a quart for every tank of gas, which should scare me more then it does but the car is running such strong MPH at the track I'm not sure what to think so I have just been watching the level closely.
Living in Texas the a/c is pretty high on my list (it hasn't been a cool summer either), luckily this isn't my daily so it isn't all the time.
Other then that the car stalls a bit at idle possibly due to cam, but it may also be a issue with how I routed all my vacuum lines and not using the vac reservoir correctly. (Plan to check on this.)
For the most part I've just been trying to enjoy the car rather than sweat the few small issues. Anyhow I'll plan to post some more pics when I tear into it soon so thought I'd throw out a update first.