Seat belt BS

Discussion in 'SVT Forum' started by ELEANOR04, Aug 8, 2009.

  1. ELEANOR04 New Member

    Member Since:
    Dec 27, 2008
    Message Count:
    4
    Likes Received:
    0
    Trophy Points:
    0
    Man.. Ok, I have an 04 Cobra that turns heads and runs about a 11sec in the Q. However, the car is a piece of ****. The internals are a jacked up... things breaking and making noise.. I wish I had that LS1 still..


    Does anyone have a good link to fix the seat belt retractor? or know how much they cost at Ford?
  2. tag4car Member

    Member Since:
    Nov 21, 2005
    Message Count:
    404
    Likes Received:
    0
    Trophy Points:
    16
    there was a TSB about the issue, there is a kit that mods some of the components in the system for around 50 +/-
  3. wmburns Active Member

    Member Since:
    Aug 14, 2009
    Message Count:
    2,492
    Likes Received:
    2
    Trophy Points:
    48
    Ford part number YR3Z-63611D70-AA for the Mustang. It is a kit with Teflon tape to improve the retraction speed of the seat belt. Common problem with many Fords. However, check the build date of your car. This TSB may not apply. Good luck.

    >>Excerpts from TSB 05-16-11 dated 08/22/05
    SAFETY BELT RETRACTION SPEED

    FORD:
    2000-2003 Mustang
    2000-2006 Crown Victoria, Taurus
    2000-2003 Explorer Sport, Windstar
    2000-2005 Excursion, Explorer
    2000-2006 E-Series, Expedition, F-150,
    F-Super Duty, Ranger
    2001-2005 Explorer Sport Trac
    2001-2006 Escape
    2004-2006 Freestar
    2005-2006 Escape Hybrid
    2004-2006 F-650, F-750

    LINCOLN:
    2000-2002 Continental
    2000-2006 LS, Town Car, Navigator
    2003-2005 Aviator

    MERCURY:
    2000-2005 Sable
    2000-2006 Grand Marquis
    2000-2005 Mountaineer
    2004-2006 Monterey
    2005-2006 Mariner

    ^ MUSTANG: Only install on vehicles built through 6/15/2003. Teflon tape was already installed on vehicles built on/after 6/16/2003.
    <<

Share This Page