Well I went to get my valve spring set and found 2 sets that are for my 94 cobra. But of the 2 I am not sure which to get or install. There are some number differences on each that I have no clue what they mean. They are as follows
The valve spring brand is Comp Cams
1.464 2 spring Assembly
seat load 332 @ 1.300
the other is
1.430
seat load 132 @ 1.750
Also they have a not that says requires machining on cylinder head. I am only changing one and not taking the head off to do so. So that note would not apply to me right?
I also have some problems identifying which seal to get. There were several brands all with some numbers. Can anyone shed some light on the product I should get? And maybe what the numbers mean?
The valve spring brand is Comp Cams
1.464 2 spring Assembly
seat load 332 @ 1.300
the other is
1.430
seat load 132 @ 1.750
Also they have a not that says requires machining on cylinder head. I am only changing one and not taking the head off to do so. So that note would not apply to me right?
I also have some problems identifying which seal to get. There were several brands all with some numbers. Can anyone shed some light on the product I should get? And maybe what the numbers mean?