Brakes Will This Interchange?

Boosted92LX

It's only an inch or two. What's the big deal?
15 Year Member
Dec 19, 2010
5,719
4,238
224
After doing ratio calculations, I've come to the conclusion that for my swap I need a 1 1/16" bore master cylinder, which is a 94-95 GT MC. This is going on a fox, 92 to be exact, and my question is, will the reservoir interchange between the two master cylinders? I'm pretty broke from tons of other car stuff and trying to save everywhere I can... So ordering the MC WITHOUT the reservoir can help.

Anybody?

@jrichker
@Mustang5L5
 
Last edited:
  • Sponsors (?)


No It will not fit. Looks identical but the hole spacing is slightly off.

Rockauto.com has MC's w/ resevoir for fairly cheap, or you can try a used one. The 94-95 GT/V6 Mustang can be had for $20 or so used. You do take a chance though.

Remans on rock auto are about $40-50.
 
No It will not fit. Looks identical but the hole spacing is slightly off.

Rockauto.com has MC's w/ resevoir for fairly cheap, or you can try a used one. The 94-95 GT/V6 Mustang can be had for $20 or so used. You do take a chance though.

Remans on rock auto are about $40-50.



Thank you sir.