chin spoiler installed... uhh.. ok?

[silentbullitt]

Looks nice

 

[H8IT4U]

Who has the least expensive ones I am next ?!

 

[sgarlic]

Well, mine was 79 from MT.. but I recently read a post where someone said Haney Motorsport had them for $75.. not sure what they charge for shipping, but it was free through MT, and they included the mounting hardware too.

 

[BlueRuckus]

.. and like I said in my original post, make sure to hit a coyote.

Well, I went out looking for a coyote to hit today, but no such luck. Do cats count?

 

[sgarlic]

.. as long as it cracks the bumper and your insurance covers it

 

[scupking]

Take the bumper off and then install the chin spoiler, much easier!
Here's pics of mine just done last week!

Looks good, I haven't checked but how many bolts are holding the bumper on?

 

[menasci]

Well, mine was 79 from MT.. but I recently read a post where someone said Haney Motorsport had them for $75.. not sure what they charge for shipping, but it was free through MT, and they included the mounting hardware too.

That was me.
go here...
http://www.haneymotorsport.com/mach1.htm

 

[scupking]

Just finished installing it.

View attachment 493872

View attachment 493874

 

[jasonh_86]

that's interesting to know.. Maybe if my front bumper cover ever needs replaced, i'll get a bumper like that

I wouldn't mind havin a new bumper/chin spoiler on the car just to clean it up a bit

 

[hotmustang331]

My 04 had 0 holes in it It wasnt too bad of an instal...it looks good. But not quite as good as that. NICE!

 

[hotmustang331]

Just finished installing it.

View attachment 493820

View attachment 493821

Looks good..but is in not flush on the VERY front? Or is it just the pic? We couldnt make mine flush up front and flush with the fender, so we evened it up with the front so there is no lip when you run your hand from the spoiler to the body.

 

[Mossberg]

I did mine like Mach's come from the factory with a slight lip in front and chin lined up with the fenderwells.

 

[scupking]

Looks good..but is in not flush on the VERY front? Or is it just the pic? We couldnt make mine flush up front and flush with the fender, so we evened it up with the front so there is no lip when you run your hand from the spoiler to the body.

I did it how ford does it with the lip up front. I like it that way. Oh and under the tree this morning was the mach 1 honey comb tail panel and a modle of a 1970 mach 1 . Have a happy holiday and a merry Christmas to all on StangNet. I’m off to my grandmas for lots of food and more presents.

 

[Dorsai]

The install instructions tell you to line up the sides with the wheel well opening and that you should have a overhang or lip at the front, on Cobras it will sit back even further under the car...just did my 04 GT this weekend.

 

[02GTRX]

I hit a skunk! too bad I already had the chin spoiler on..knocked it right off that sob! anyway I found it easier to use a jack to hold it up instead of taking the whole bumper off!

 

[sgarlic]

I hit a skunk!

Now you're talking! Try bigger next time though.. an insurance claim could net you a 03 cobra bumper!