1/4s and wheel wells

[iggy]

i have a 67 fastback that im restoring,my question is are the rear 1/4 panels welded to the wheel wells, mine just have some type of black seam sealer in between the two,to hold them togeather. thanks

 

[James Kirk]

if they have never been replaced they should be spot welded to the outer wheel house from the factory.
Kirk

 

[geostang351]

IF they are seam sealed, it has been replaced. Be prepared to see lots of bondo. Look in trunk at the 1/4 panels and see if you can see an over lapping of seams or signs of partial panel replacement.