I have looked for that plug my guess is it has been cut off at some point gonna have to find a donor car so I can get that plug and wire it in myself and the wiring diagram is a huge help thanksLook for the shape of this connector. Nothing should be plugged into it. It's nothing in your pics.
I see a few cut off wires. Why would anyone cut anything off?
Will do thanks againYou gotta find an old Ford in a junkyard.
If you do, use this splice:
Heat Shrink Solder Sleeve Butt Splice Wire Connector Waterproof
I do not suggest using these anymore after I had multiple failures and was forced to open my wiring harness and replace every one of them. The solder joint would brake and give an intermittent connection, I simple use a cold weld connector and heat shrink all connections now.You gotta find an old Ford in a junkyard.
If you do, use this splice:
Heat Shrink Solder Sleeve Butt Splice Wire Connector Waterproof
I've always hand soldered and heat shrinked all my connections, what are these "cold weld connectors" you speak of?I simple use a cold weld connector
a compression connector [typical butt splice] when properly applied is considered a cold weld joint.I've always hand soldered and heat shrinked all my connections, what are these "cold weld connectors" you speak of?