So, putting a radio in is the very last thing on my list, got to get car back together and moving again ect... but I want to pre-wire for the raido and amp and speakers before I put the new carpet in... so I don't have to do it after the fact.
I haven't messed with audio stuff in a long, long while.... I plan on getting a 100.xx radio something like this Kenwood - https://www.crutchfield.com/p_113KMBT325/Kenwood-KMM-BT325U.html?avf=Y don't need no CD... it has 6-channels...
I want to put a amp in, nothing $$$ just want decent sound... I have an old single MTX sub woffer in a sub box (non-powered) I had for over 10 years or more, but was only used for like a year.. can't remember if it's a 10" or 12" been in basement wrapped in trash bag... so I plan to use that for the sub. So I need to replace all 6 of the factory speakers... the 2 in dash, 2 in door, and 2 in the rear...
So, can I get a single amp to run all that? or am I going to need 2? I really need to know what RCA cables and power cables I will need so I can run that before I put carpet in, so when the time finally comes to do radio, the lines/cables will be there...
So with that radio example, that is a 6-Channel... it has, front, rear, and sub out puts, so I would need 3-sets of RCA's right... now, for the speaker wires, since there are 4- front speakers... how would I split them from the amp? What channel amp do I need to be able to hook up the 4 front speakers, 2 rear speakers and the 1 sub woofer... do I need splitter/cross over??? the speakers in dash would they only play highs, and the ones in doors mid/lows? and the rears full range?
And what size power wire should I run to the back... and if I need 2 amps, can' that be split between the 2 once in the back? (I would really like to have 1 amp if I could) don't need no windows shacking power, just want enough to sound like a great factory radio.
I have a rear seat delete kit I will be installing, so the amp and wiring will go under that.
I haven't messed with audio stuff in a long, long while.... I plan on getting a 100.xx radio something like this Kenwood - https://www.crutchfield.com/p_113KMBT325/Kenwood-KMM-BT325U.html?avf=Y don't need no CD... it has 6-channels...
I want to put a amp in, nothing $$$ just want decent sound... I have an old single MTX sub woffer in a sub box (non-powered) I had for over 10 years or more, but was only used for like a year.. can't remember if it's a 10" or 12" been in basement wrapped in trash bag... so I plan to use that for the sub. So I need to replace all 6 of the factory speakers... the 2 in dash, 2 in door, and 2 in the rear...
So, can I get a single amp to run all that? or am I going to need 2? I really need to know what RCA cables and power cables I will need so I can run that before I put carpet in, so when the time finally comes to do radio, the lines/cables will be there...
So with that radio example, that is a 6-Channel... it has, front, rear, and sub out puts, so I would need 3-sets of RCA's right... now, for the speaker wires, since there are 4- front speakers... how would I split them from the amp? What channel amp do I need to be able to hook up the 4 front speakers, 2 rear speakers and the 1 sub woofer... do I need splitter/cross over??? the speakers in dash would they only play highs, and the ones in doors mid/lows? and the rears full range?
And what size power wire should I run to the back... and if I need 2 amps, can' that be split between the 2 once in the back? (I would really like to have 1 amp if I could) don't need no windows shacking power, just want enough to sound like a great factory radio.
I have a rear seat delete kit I will be installing, so the amp and wiring will go under that.