Anyone Have A Desktop Dyno? Wanna Take A Guess At Hp And Tq For Me?

dusto1002

New Member
Aug 8, 2016
14
0
1
31
351c bored .030 Aussie heads 58cc heads, electric fuel pump, Eddie performer rpm, light port work, Eddie 600cfm carb, comp cams magnum 110lobe sep, 530 lift intake and exhaust, 280 duration, 1 7/8 headers, 6000rpm redline, t5 trans, 4.10 gears.

Did I miss anything? Thank u guys! Seat of the pants feels over 300 and I can't dyno right now, a bit too expensive.

Sent from my SM-G900V using Tapatalk
 
  • Sponsors(?)


rbohm

SN Certified Technician
Apr 12, 2002
6,547
515
204
61
tucson,az
when does the intake/exhaust valve open and close, and is the 280 duration advertised or at .050"lift?

also do the pistons have domes, dish and what cc do they take up?

what size valves?
 

dusto1002

New Member
Aug 8, 2016
14
0
1
31
230 at .50 and I have a 1.7 ratio rockers. 10.7 cr, I think its a -3cc piston on 59cc heads. Valves are 2.05 intake 1.65 exhaust.

Sent from my SM-G900V using Tapatalk
 

dusto1002

New Member
Aug 8, 2016
14
0
1
31
Exhaust closes 26*atdc opens at 74* bbdc

Intake opens 34* btdc and closes 66* abdc

Sent from my SM-G900V using Tapatalk
 

dusto1002

New Member
Aug 8, 2016
14
0
1
31
Rbohm do u still follow this thread? I made a mistake, gave u my old cam pecs on accident... I was off a bit...

Sent from my SM-G900V using Tapatalk
 

dusto1002

New Member
Aug 8, 2016
14
0
1
31
Found my cam card in my trunk and instantly knew I f'd up.

If u see this and have the time and feel like it, the can specs are actually

.584 in .588 ex lift
110 lobe separation
240in @ .05 and 246 ex @ .050
36 intake open btdc, in close 68 atdc
82 exhaust bbdc open, 34 atdc close

Sent from my SM-G900V using Tapatalk