i haven't had power door locks since i got this notch. one of the prior owners f'd them up apparently. here is the symptoms;
drivers side controller does zero to either door lock. power windows work fine.
passenger side controller will UNLOCK the passenger side only, ocassionally on the first push it will nudge the drivers side actuator also. it has also caused the drivers side actuator to make an electric buzz noise, while pushing the unlock control from the passenger side.
i paid to get this diagnosed by a shop, it left me inconclusive. he tested them, both actuators do work. he did some kind of jumper wire deal and it made the doors work together. he was getting no power to the drivers side, but would get small bursts of power when i would push the passenger side controls. this is just observations i saw, i am worthless with electrical. especially on this level.
long story short, he left me with saying "its gotta be the buttons, if it's not those bring it back and i'll rewire everything. it will be 200-300".
i've tried spare buttons i had on each side. no change. if the wiring is working fine for my windows, i dont see how both door lock controls fail. fuses are all good. im confused, and apparently so are shops.
so what, off these symptoms, would you guys do next?
drivers side controller does zero to either door lock. power windows work fine.
passenger side controller will UNLOCK the passenger side only, ocassionally on the first push it will nudge the drivers side actuator also. it has also caused the drivers side actuator to make an electric buzz noise, while pushing the unlock control from the passenger side.
i paid to get this diagnosed by a shop, it left me inconclusive. he tested them, both actuators do work. he did some kind of jumper wire deal and it made the doors work together. he was getting no power to the drivers side, but would get small bursts of power when i would push the passenger side controls. this is just observations i saw, i am worthless with electrical. especially on this level.
long story short, he left me with saying "its gotta be the buttons, if it's not those bring it back and i'll rewire everything. it will be 200-300".
i've tried spare buttons i had on each side. no change. if the wiring is working fine for my windows, i dont see how both door lock controls fail. fuses are all good. im confused, and apparently so are shops.
so what, off these symptoms, would you guys do next?