front runners on my cobra

[sprayinsnake96]

ok heres da deal now obviously cobras have big brakes on front now i wanna know what u guys have done to get front runners on ur cars cause only 17s fit on front lemme know thanx gentlemen.

 

[99SVTAddict]

Info:

Bogart Racing
Ricky
(619)596-7605

They offer front runners that will clear the brakes. They weld on a spacer to make it all work.

 

[Strokin347]

i just use 2 1/4" spacers on each wheel to space them out enough. I have the weld prostars for when i go to the strip. I just snug the wheel up to the rotor then take my fingers and center up the spacers then torque them down.

 

[19cobra93]

Although my cobra is a '93, I have the newer 13" brakes on it. I use a 1" bolt on spacer, then bolt my welds to it and it works great. I have/use 15x3 Weld Ultralites in the front when I go to the track.

 

[missouri_guy197]

You can get an hubcentric 25mm or 30mm H&R or Eibach spacer and some 15x3.5" skinnies will fit the big brakes...you may have to grind down the stock lugs a bit or they'll stick through the spacer and get in the way of the wheel, but that's no biggie...

 

[sprayinsnake96]

gentlemen as always appreciate the help my hats of to u guys i will try a spacer thanx.