Thats not far at all. Hopefully you do. If not one that I can take capacitors of will do. I’m trying to get it started today.You can always find the capacitors on Amazon, if you need someone to fix it it's a simple soldering job. Any electronics repair shop can do it.
What ECU is it? I am in Plant City and may have a good one in the shop.
YborDo you have phone number? How much would u sell it for? I’m in Thor city now. For the next hour
Lol no I don’t have a trace kit lol but I didn’t need it . I fix capacitors and fuel pump relay next to the ecu was bad . Started right up after. Now I’m getting a bit of a stall and a bit of black smoke.Good deal hopefully you get back up and running soon. Make sure and check for broken traces on the PCB. If there are you can use jumper wires in the place of the bad traces on the board since I doubt you have a trace repair kit laying around. lol
Hey I got it running. Capacitors and also a bad fuel pump relay by the ecu was bad. It firedSorry been really busy at work lately, I will be bumping around outside in the morning and will check on the ECU then.
Hey I got it running. Capacitors and also a bad fuel pump relay by the ecu was bad. It fired
Right up. But getting a bit of a stall and black smoke. Computer reads out code 68, and 98 .