What would cause the left sid eof my car to be lower than the right? I measured from top of rim to wheel well on both sides and the left is a 1/2 inch lower?
EVERYThing is brand new.
EVERYThing is brand new.
New Suspension left side lower than right?
- Thread starter 88-378
- Start date
-
Sponsors (?)
Not an uncommon problem bunch of posts on it if you type suspension lean or something into search http://forums.stangnet.com/showthread.php?t=659552 is one that might have some answers.
Thanks!!
It's gonna go back to the shop next week and they'll take a look. everything seems to look ok. Could be the springs that are not rotated alike.
Were the control arms replaced? Tightening the contol arms bolts when the suspension is not under load (weight of the vehicle) can cause this.
Both the left front and rear are sitting 1/2 to 3/4 inches lower than the right.
I replaced: springs, shocks, KMember and that's it. It already had some Steeda lowers along with FRPP uppers.
I am thinking the springs are not sitting right in their perches or yes the control arms were not under load when tightened, but that would not explain the front? Would it?
I replaced: springs, shocks, KMember and that's it. It already had some Steeda lowers along with FRPP uppers.
I am thinking the springs are not sitting right in their perches or yes the control arms were not under load when tightened, but that would not explain the front? Would it?
rottn1
New Member
the same thing happened to me when i placed new a-arms , the ball joint came threw causing left to be lower than the right , caused by me of course , improper jack placement
Similar threads
