Newbie Miami

[Miami1985]

Hi everyone,

So I recently purchased an 85' GT with 31k original miles.
Currently it has the following installed
- Edelbrock performer intake
- Edelbrock performer plus cam
- 2 1/2 stainless flowmaster exhaust
- 8.8" 3:73 gears

I am looking to swap the heads and possibly cam since I believe it's has a relatively mild cam (waiting to receive specs).
I would like to go with either AFR 165 or TFS heads.
Does anyone know if the AFR 165 heads will bolt on to a stock 85' motor without any valve clearance issues?

Any help is greatly appreciated.

 

[Dustin@LMR]

Welcome to the site, and congrats on your purchase!

If you ever need anything, such as the forum discount code, feel free to shoot me a PM, and I'll be happy to help you!

In the meantime, you are more than welcome to browse our website for all of your Mustang parts, and needs!
1979-1993 Fox Body Mustang Parts, 5.0 Mustang Parts

 

[madspeed]

welcome aboard, nice find with those low miles. spend some time reading over in the fox section, there's tons of good info to get you pointed in the right direction