I am getting the ECM today out of a 96 F150 5.0 5 spd , then I have to find an OBD2 port , and the plan is to re pin the ECM plug on the car for the truck ECM and then run the 11 or so wires to the OBD2 port and that way I can use Snipers Special Forces to tune the car , it has a 331 stroker with trickflow heads , Xcam and Procharger D1 with 12 lbs pulley on it ......plus the OBD2 will allow me to datalog thru the OBD2 port which will make tuning the car much easier ..... the idea came after I noticed the 96 F150s had the same 5.0 engine and distributor and a mass air meter on them instead of the older trucks that have Speed density computers and the newer 4.6s have crank triggers instead of distributors ....... I will be posting pics as I go , getting the ECM for $40 bucks at a local salvage yard / figured I would post here since I know some guys might want to do this themselves to take advantage of the easier tuning