Making a lot to do about not a whole lot here. Pump can be done without even taking the pan off the car and that includes replacing the sump if nesc. Not everyone has access and the tools nesc. to pull an engine especially when you live in a apartment complex or something. All that has to be done is pull the rack forward leaving it attached at the outer tierod ends. Dont even have to loosen the motor mounts of you dont feel like it. Now that the rack is out of the way, once the oil pan is loosened up all the way, it can be shoved around to where there is exactly just enough clearance to reach in and get the sump nut off as well as taking loose the pump. Also, the felpro pan gasket with the plastic dowels is the way to go when doing this. All in all it took me 8 hrs and that was including time waiting on a lightening storm to pass thru....l8r