Heres what I did,
Obviously I cleaned the rims up good,
I used brake cleaner and rubbing alcohol to make sure the area was totally clean,
Then rubbed that off with water on a rag so the paint would stick to the surface,
Took off the wheel weight (yes I know there fugly but I dont have the sticky ones, If you can buy them at pepboys or something ill get them
)
Taped off the tire
Taped off the Pony in the centre cap (That took a while to make a tape template)
Then sprayed and sprayed untill the can was empty leaving time for paint to get "tacky" between coats as per instructions on the back of the can,
Then I left it for a few hours and came back with the clearcoat,
I think I did 3 or 4 coats,
Then left over night to dry in a garage,
Thats it
Thanks for the compliments guys