Ok, it's a Ford, but not a Mustang. My new to me DD, a 2009 F150. I have owned it for 6 days and the drivers side window has started acting up. I can roll it down without any problems, but it stops when I roll it up. If I let it sit for a few minutes, I can continue to roll it up. It seems to only want to roll up for a few seconds without dying.
I pulled the interior door skin and removed the switch and motor. I get 12.2X Volta in both directions with the switch, but this is without any load placed on it.
When detached, the motor spins freely in both directions when 12v is applied. I tried using a rag and grabbing the teeth on the motor to induce a Drag, but th e motor never stops turning.
The regulator is in good shape. Does this sound like a switch, or a motor problem? My next thought is to power up the motor with it installed and see what happens. Ideas?
Joe
I pulled the interior door skin and removed the switch and motor. I get 12.2X Volta in both directions with the switch, but this is without any load placed on it.
When detached, the motor spins freely in both directions when 12v is applied. I tried using a rag and grabbing the teeth on the motor to induce a Drag, but th e motor never stops turning.
The regulator is in good shape. Does this sound like a switch, or a motor problem? My next thought is to power up the motor with it installed and see what happens. Ideas?
Joe