question for the modified taillights

[75stang302]

how did you guys wire the three reds to get rid of the separate amber light?
i tried one of the trailer light converters but it couldnt handel the amperage.so i made my own setup out of relays

 

[jeffnoel]

When I did the conversion I left the buckets stock with 4 lights each side. I cut the seperator from the center lights so that the former reverse light is now a tail/brake light, doing this allowed the lower bulb to illuminate the complete center section. And I left the turn in the stock location for now until I do the sequentials.

 

[zwhitr]

When I did the conversion I left the buckets stock with 4 lights each side. I cut the seperator from the center lights so that the former reverse light is now a tail/brake light, doing this allowed the lower bulb to illuminate the complete center section. And I left the turn in the stock location for now until I do the sequentials.

Nice job on the tail lights ---What about the reverse lights arn't they still required for state inspections ??

 

[75stang302]

i dont have any reverse lights.but if i installed some it would be a long thin light under the bumper so it wouldnt be very noticable

 

[jeffnoel]

Thats what I'm thinking, I thin oval fog/driving light flush with the bumper.