Stock 14K mile '92 Notch Dyno Video

  • Sponsors(?)


Habu135

Advanced Member
Jan 10, 2019
602
379
73
40
California
The horsepower seems about right. The torque seems a bit high, but maybe it's a strong car.

I'm guessing that car is $20K+ to the right buyer.
 

JMGlasgow

Mustang Master
Feb 19, 2017
676
350
93
39
I bought my 52k mile 1993 GT for almost $10k and it's insured for an agreed upon value of $12,500. $20k might not be too far off for that coupe.
 

Gs87GT

Active Member
Sep 25, 2019
238
77
38
Penn's Woods
That's a beautiful notch. I love it. Good numbers for stock too. Typically I figure 20% average for drivetrain loss (fwh vs rwh), so that car is less than that. Pretty cool
 

Gamble909

Member
Sep 12, 2019
9
7
13
41
Georgetown KY
Man, that is one good looking coupe. I am all about the performance aspect and the sound of a good cam profile tumbling out the exhaust pipe, but mad respect goes to a car this clean and unmolested.
 
  • Like
Reactions: Habu135

Habu135

Advanced Member
Jan 10, 2019
602
379
73
40
California
I reached out to LMR and got this response:

"The car is owned by LMR. We plan on releasing more videos on the car since it is such a time capsule! As for where it was located and how much the car set us back, I'm going to remain silent in this email. We may choose to reveal some more info in future videos and we explore this fine Fox!"
 

Mstng93SSP

You have a nice rear end there Dave.
15 Year Member
Nov 29, 1999
2,024
2,350
184
Mililani, Hawaii
I would possibly throw close to 20k for that. You can barely get a 2019 Honda Civic for 20k....

Chris
 

Habu135

Advanced Member
Jan 10, 2019
602
379
73
40
California
I suspect LMR paid close to $25K. It could probably be written off as a business expense if they use it for advertising and such.
 

Habu135

Advanced Member
Jan 10, 2019
602
379
73
40
California
It's funny how the coupes were shunned by all but the racers back in the day. Now they're the most in demand (in my opinion).

I'd sell my coupe for a '93 Cobra, but that's it.
 

Mustang5L5

i'm familiar with penetration
Mod Dude
Feb 18, 2001
33,300
9,600
224
Massachusetts
It's funny how the coupes were shunned by all but the racers back in the day. Now they're the most in demand (in my opinion).
Back in the 90s, all my buddies wanted coupes. I actually wanted a GT hatchback, but “settled” for my LX hatch.

But since we were always at the track, everyone wanted to buy a notchback because they were “like 700 lbs lighter”

———

If I was LMR I would find a stock exhaust for that and preserve it.

I’d also say if I had $25k sitting around.....I’d buy an 03/04 cobra or a s550.
 

Habu135

Advanced Member
Jan 10, 2019
602
379
73
40
California
Back in the 90s, all my buddies wanted coupes. I actually wanted a GT hatchback, but “settled” for my LX hatch.

But since we were always at the track, everyone wanted to buy a notchback because they were “like 700 lbs lighter”

———

If I was LMR I would find a stock exhaust for that and preserve it.

I’d also say if I had $25k sitting around.....I’d buy an 03/04 cobra or a s550.
That's the rub isn't it? The immense temptation to mod that car! It's so clean, why not just do this little thing or that little thing? I'm going through in my mind what I would do and then realize that that car has to be left as is. No timing increase. No subframe connectors. Nothing. Lol
 

Mustang5L5

i'm familiar with penetration
Mod Dude
Feb 18, 2001
33,300
9,600
224
Massachusetts
That's the rub isn't it? The immense temptation to mod that car! It's so clean, why not just do this little thing or that little thing? I'm going through in my mind what I would do and then realize that that car has to be left as is. No timing increase. No subframe connectors. Nothing. Lol
Well that's just it. I'd have to mod it. 193 rwHP is impressive for a stock fox, but I think my daily driver puts down more HP than that and can probably outhandle and outbrake it to. The urge to improve is quite strong.

However, given that I already have a modified foxbody, i urge LMR to give me the car and i can guarantee i will leave it stock
 
  • Haha
Reactions: General karthief

Habu135

Advanced Member
Jan 10, 2019
602
379
73
40
California
Well that's just it. I'd have to mod it. 193 rwHP is impressive for a stock fox, but I think my daily driver puts down more HP than that and can probably outhandle and outbrake it to. The urge to improve is quite strong.

However, given that I already have a modified foxbody, i urge LMR to give me the car and i can guarantee i will leave it stock
I'm sorry to tell you this, but they already promised me the car.
 

FastDriver

My dad had a bra
SN Certified Technician
Sep 5, 2001
4,527
1,239
214
Fort Knox, KY
I'm not leaving a GT or LX fox stock, period. I'm not sure if I'd resist temptation on a Cobra, R, or Saleen, but I'm pretty sure I could bring myself to leave an R alone, even though the odds of getting one of those are right there with winning a lottery.
 

Habu135

Advanced Member
Jan 10, 2019
602
379
73
40
California
I'm not leaving a GT or LX fox stock, period. I'm not sure if I'd resist temptation on a Cobra, R, or Saleen, but I'm pretty sure I could bring myself to leave an R alone, even though the odds of getting one of those are right there with winning a lottery.
Honest question: If your father or grandfather bought an original '69 Mach 1 or similiar car would you encourage your grandfather/father to mod it?
 
Thread starter Similar threads Forum Replies Date
B Fox ARP Main Studs or ARP Main Bolts for Stock Rebuild 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 9
D Stock rocker arm breaking Fox 5.0 Mustang Tech 22
D stock rocker arms breaking The Welcome Wagon 2
H Engine afr 185 heads + anderson n41 cam = stock bottom end happiness?? Or no worky Fox 5.0 Mustang Tech 3
H For Sale Stock 302 Heads Engine and Power Adder 0
B Had a 91 mustang GT for a while now and can't seem to figure out what to put in it or leave it stock Im thinking of a 351w to put in it any ideas The Welcome Wagon 1
aj351w WTB/Trade Stock Mustang 5.0 cam wanted Engine and Power Adder 2
H Adding Factory Look Air Conditioning to 70 Without It 1965 - 1973 Classic Mustangs -General/Talk- 1
R Stock appearing power 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 21
C 347 Holley Terminator X or stock ecu good enough 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 2
M 08-09 OEM HID Using Stock Harness - Write Up 2005 - 2009 Specific Tech 1
T 4 brrl intake/carb combo for stock 1966 fastback 289 1965 - 1973 Classic Mustangs -General/Talk- 2
J Engine Trickflow Intake Street Burner Spacer Needed? Fox 5.0 Mustang Tech 13
nickyb Fox Looking at going back to a stock air box? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 32
N How good is the stock spoiler? 1996 - 2004 SN95 Mustang -General/Talk- 26
F Changing 4inch stock center screen to 8inch double din 2015+ (S550) Mustang -General/Talk 0
S Replacing stock tires and wheels on my 04 Mustang GT 1996 - 2004 SN95 Mustang -General/Talk- 0
02 281 GT LMR is making an ‘89-‘93 stock intake tube repro 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 13
Gs87GT Fox Questions on stock suspension rebuild. 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 5
R 2012 mustang stock headlights 2005 - 2014 S-197 Mustang -General/Talk- 3
Foxslider SOLD WTB: 87-93 stock foxbody axle out of 8.8. Drivetrain Parts 0
vristang Stock IRCM with Taurus fan 2.3L (N/A & Turbo) Tech 2
C Biggest injectors you can run on stock ecu? Fox 5.0 Mustang Tech 43
P Progress Thread Almost Stock Rebuild (89 GT) 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 34
C Stock rocker adjustment with a e303 cam Fox 5.0 Mustang Tech 22
C Brakes Stock fox front brakes with sn95 rear Fox 5.0 Mustang Tech 8
Habu135 Fox : How Much Power Does a Stock 1993 Cobra Make? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 7
S Stock 1993 LX 5.0......What Bolt On Mods ? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 11
V 11r 190 on 92 stock bottom end? Fox 5.0 Mustang Tech 13
James V Fox How much boost is safe to run. Stock engine 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 10
NickMadore Stock MAF with upgraded Throttle body? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 17
John Dirks Jr Stock crank pulley 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 9
S Fuel 1995 stock Mustang EFI vs aftermarket TBI or Edelbrock injection? Jag Project Car Fox 5.0 Mustang Tech 13
S Rear Axle and Stock Fan/Shroud help w/ 351w 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 0
T Suspension Mustang II stock upper control arm removal? 1974 - 1978 Mustang II Talk & Tech 5
EX-SSP WTB/Trade Need stock alternator pulley Engine and Power Adder 3
MrPerfect2 Will steeper gears put more stress on AOD and a stock 5.0 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 34
6 Biggest rear tire stock height 1966 Mustang??? 1965 - 1973 Classic Mustangs -General/Talk- 0
D Aftermarket CAM closest to stock 94/95? 1994 - 1995 Specific Tech 16
MrPerfect2 Timing a stock GT 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 45
D Carb Recommendations for 68 stock 289 2V Classic Mustang Specific Tech 1
S High flow cats on a Stock 2V Mustang GT? Yay or nay? 1996 - 2004 SN95 Mustang -General/Talk- 1
R Stock crank limit numbers? 1996 - 2004 SN95 Mustang -General/Talk- 11
Noobz347 Forced Induction How Much Power Will I Make? Stock vs. Supercharged, Side - By - Side 2015+ (S550) Mustang -General/Talk 0
Hoytster For Sale Fluidampr Harmonic Balancer - Stock 302 Balance - Used Engine and Power Adder 1
E Custom mod to 2002 gt stock headlights SN95 4.6L Mustang Tech 1
Infoxicated5.0 Stock clutch cable adjustment question 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 17
S Electrical Stock tach wont work plugged into msd6al box? Fox 5.0 Mustang Tech 27
Foxslider Camber adjustment w/ stock stuff 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 10
JMGlasgow Stock block or? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 25
Similar threads