Ok i was orignally going to use my stock long block and the on3 turbo..But i since bought a Trickflow street heat intake,a set of Trickflow heads...that have this done to it.These heads have been ported and flowed
Intake flows 297 at 600 lift
exhaust 238 at 600 lift
there part# TFS-51400004 a set of 1.6 roller rockers ..im using the stock cam...fuel upgrades are going to be a 340 lph pump,42# injectors,MAF conversion,70mm TB, an AEM wide band, The car is going to be tuned..Im going to be running about 9-10 psi...will i make 400 rwhp and do you think i can get my heavy vert into the 11's?...Im trying to get some better parts to help with HP..I know the stock block islimited..but with a safe tune i should be ok no? Thanks
Im going to be using felpro 9333 pt1's and studs....
This going on an 87 GT convertible..thats still Speed density...thats why im converting it...It has an Worked AOD mild stall 2600 rpms i think i need more...and 3.55's