universal harness help!!!

[xoxbxfx]

Ok so I thought everything was going great. Just need to attach all the headlight/taillight/reverse light pigtails and I will be done...WRONG. Electric fuel pump power wire has no power... any ideas? It doesnt have power in acc, on or start. What am I doing wrong?

 

[xoxbxfx]

no one yet.... Well I started thinking.... is that just a signal wire and it needs a relay to be put in?? I figure if its a signal wire, it still needs power running through it to give signal..

hell, I dunno

 

[Edbert]

You could be right about the signal bit but it would still be hot, ofg course if it did not carry enough current it could have popped a fuse, is there any current at all? Does that circuit have power to the fuse?

 

[xoxbxfx]

You could be right about the signal bit but it would still be hot, ofg course if it did not carry enough current it could have popped a fuse, is there any current at all? Does that circuit have power to the fuse?

no power to the fuse

Im must going to run my own switched hot and inline fuse

 

[Edbert]

If the fuse is cold you have a warranty issue. It your universal kit from Painless? They'll stand behind it for sure.

 

[xoxbxfx]

If the fuse is cold you have a warranty issue. It your universal kit from Painless? They'll stand behind it for sure.

its an EZ21 harness.... I have used one in the past and had no problems... this one is starting to piss me off. Im rechecking all my connections, but its looking like a cold fuse socket.