After doing my wire tucks on the passenger and driver side…… I really can’t stand looking at the harness across the firewall (even though I tucked it under the pinch weld).
Some day the dash will come out and I’ll hide that part too……. Some day!
Will your fender liner still fit properly? I also want to note that those crimp connectors dont look all the reliable to me. And a couple of the wires look stretched coming off the unreliable crimp connectors.
Grab a 1/4" vac line and split it down the long way and use it to line the pass-thru where the red power wire goes through the fender. This will prevent it from rubbing the insulation on the edge and potentially shorting to metal.