Crooked Upper Torque box kit

NewToFord

Member
Oct 7, 2008
318
1
19
CT
I installed my upper upr torque box kit. I got all 4 bolts through the piece underneath and drilled the plate that sits in the car. The plate that sits in the car is crooked. The other pics that I have seen show that the plate sits straight. How could this be if all 4 of my bolts are caught and tight? Also the plate does not sit flush on the floor of the car, like I have seen in pics. Any suggestions? Thanks
 
  • Sponsors (?)


First you more then likely drilled it wrong and not straight secondly I had mine not sit flat I just heated it with a torch and beat it in place before I welded them up
 
Mine didn't either in the driver side , I had to use a bottle jack to straighten it out


Sent from my iPhone using my fingers
 
How you drill the holes can affect it, but they're never perfectly symmetrical. This is not a UPR thing. This is an anybody's torque box plates thing. I personally snug the bolts, hammer the plates to shape them to the floor, then weld them in.
 
  • Like
Reactions: 1 user