If you mean the seat belt fitting is 180* from where it should be, then you can fix it yourself. You need patience because it takes a few tries to get it turned around. Take the buckle and start to fold the belt over on one edge. Pull/slide the buckle up over the fold while trying to increase the amount of folded belt running through the slot in the buckle. This is the tricky part because the fold in the belt seems to stay the same unless you tug at it at the same time the buckle is sliding up. This works in either direction so when you get the buckle up as far as you can on the belt and there is still more belt to roll over, keep tugging on the folded edge while you pull the buckle down. Eventually, the buckle will be turned over on the belt, just the way you want it.