just got back from the dyno.....if anybody cares :)

i dynoed the car before i throw some heads and a cam on it. ill probably change the mani as well too.....for the dyno i had eddy performer intake, LTs, X pipe, borla catback, underdrives, cai, C&L 76mm Maf (which is causing me issues), short belt, and an aluminum d/s if that even makes any hp.....i have more mods but those are the ones that add hp...ohh and i dynoed it with the stock tb, not the 70mm stated in my sig.

i made 251/306

what do you guys think?
im having trouble uploading the graph
 
  • Sponsors (?)


Yeah, 251/306 is very good for a long block 5.0 with only "stage 1" bolt-ons and an intake. I'd be interested to see the graph. The best I've seen with a stock long block, stock intake, and only "stage 1" bolt-ons is 235/290 so the Eddy Performer IS adding HP/TQ despite the restrictive stock heads. The Performer is a long runner intake that performs best from idle-5500rpm so that could be the reason.
 
Or sign up for a free account at Photobucket, and upload the pictures there. It will automatically format them in convenient settings for forum posting. Then you can just link into the pictures there.
 
Attached. Impressive #s!

Wes
 

Attachments

  • Old Run.jpg
    Old Run.jpg
    59.1 KB · Views: 152
  • New Run.jpg
    New Run.jpg
    57 KB · Views: 120
Shame there isn't a graph with rpm but since the run was done in 4th gear (20.5mph/1000rpm with 3.73 and 245/45R17 tires), the 252rwhp peak is at 5000rpm and the 306rwtq peak is at 3800rpm.
 

Attachments

  • 5.0GT_EdlPerf_Boltons.jpg
    5.0GT_EdlPerf_Boltons.jpg
    57 KB · Views: 91