I finally started tearing my engine down to do the rebuild. Originally i was just gonna do a H/C/I install but a rod started knocking so i guess its time for a rebuild.
Im going to be putting on AFR 185's, a Edelbrock Performer 2 intake, a CC xe282hr cam and 24# injectors. The only thing being done to the bottom end is a high volume oil pump other than new bearings, rings and seals. Not sure if Im going to have to notch the pistons yet though.
Im also going to be installing a Tremec 3550 and a new bellhousing and shifter.
Ill post pics so yall can see how its going.
Any advice or help is appreciated.
Wish me luck
Im going to be putting on AFR 185's, a Edelbrock Performer 2 intake, a CC xe282hr cam and 24# injectors. The only thing being done to the bottom end is a high volume oil pump other than new bearings, rings and seals. Not sure if Im going to have to notch the pistons yet though.
Im also going to be installing a Tremec 3550 and a new bellhousing and shifter.
Ill post pics so yall can see how its going.
Any advice or help is appreciated.
Wish me luck