Search results

  1. hotrodt

    Centerline Telstars w/tires

    Fronts are 15x4 with brand new tires Rears are 15x10 6.5 B.S. with M/T 28x10 slicks intertubed and screwed on the back side only, they clear my Aerospace Components pro street brakes no problem and tuck nice with my stock length axle in my '86 GT comes with spacers, lug nuts and center caps...
  2. hotrodt

    86 GT RS275 Roller

    86 GT Hatch, car works and is very well put together. Clean titled 86 Gt excellent body, the only rust anywhere on the car is where I think the previous owner's battery exploded and the battery acid got to the very front frame rail, i have been running it with no problems at all and I doubt...
  3. hotrodt

    R-Blocked 331ci part out

    25 1/8th mile passes with 10 of those being nitrous passes and only 5 of those being a 225hp shot R302 block 4 bolt splayed billet mains on 2,3 and 4 .030 o-ringed ,1/2" ARP Head Studs,Probe 13:1 pistons Calico coated tops, teflon coated skirts,hellfire ringpack, Scat ultra light 4340 steel...
  4. hotrodt

    275 Drag Radial '86 GT fs/ft

    *price drop* $15,000 I had this car built for RS275 Drag Radial per the NDRRA rules, I have $30,000 plus dollars in this car and have all the receipts that are verifiable. '86 GT hatch car that is very straight and rust free. HO Fiber trends 5" fully extended cowl hood 10 point cm...
  5. hotrodt

    Black Dragstars 5 lug NIB

    5 lug 15X10 6.5" Backspaced powder coated black Dragstars. They fit perfect on my '86 without the quad shocks and a stock length rear. They will fit any 5 lug mustang. I mounted radials on them put them on the car and didnt like the murdered out look so they are for sale(without tires) $375.00...
  6. hotrodt

    5 lug Black Powdercoated Dragstars 15x10 6.5bs

    New, mounted only never ran don't like the backs being different from the fronts. $400 plus the ride comes with bolt on center caps, hub centrics , offset washers and lugs. Uploaded with ImageShack.us Uploaded with ImageShack.us
  7. hotrodt

    '98 shortblock w/pi heads and cams

    I have a '98 shortblock with pi heads and pi cams, also have manifolds that go with. This motor ran very, very good before being pulled for a 40,000mile 2001gt motor. No knocks, pings or smoke. One of the pi heads has a boogered up cam journal(guy gave them to me)they were never put on. Motor...
  8. hotrodt

    the new motor

    '88 roller block all fresh stock bottom end w/ the exception of studs and a girdle, F303 cam, victor jr. heads w/ 2.05/1.60s, K-motion springs, harland sharp roller rockers, electric water pump, parker funnel web intake, all arp fastners including head studs, msd dizzy w/ wires, edelbrock...
  9. hotrodt

    motor won't turn over

    Brand new motor new bearings,rings etc,etc I cannot get this motor to turn over. I tryed putting two bolts in the pully holes on the dampner and used a 6' crow bar and it still won't turn over just bent the bolts. Checked the torque numbers on the rod and mains, rods checked right under 45lbs...
  10. hotrodt

    valve train geometry?

    1988 5.0 this block originally had a hydraulic flat tappet cam in it. I bought a new set of lifters for it and a comp cams 305h camshaft, after putting the cam in i dropped the new lifters in and they sit down in the lifter bores 1/4" at full lift the lifters are out of the lifter bore a...
  11. hotrodt

    Probe piston probs.

    Anybody had problems with probe pistons and nitrous?
  12. hotrodt

    88' to 95' tranny ?

    will an 88' aod tranny swap into a 95' aod car? it is imperative that the answer be correct so if your not sure DON'T respond. Both cars were v-8 cars thanks
  13. hotrodt

    clearance issues!

    I am attempting to put a z303 cam in a 302 and am having some serious valve to piston clearance issues. The heads I bought are aluminum procomps with +.100 length valves. I have not bought any pushrods yet as I can't get my length to come out yet, i am using a pushrod length checker to actuate...
  14. hotrodt

    Busted Block?

    Building a new motor and am a little worried about the block. 1980 302 block punched .040 shooting for a conservative 300 to 350 horsepower possibly 400 with the right parts. Is this block worth using or should I find a stock bore Mexican block?:shrug:
  15. hotrodt

    Is this a 289 or 302

    I have looked everywhere for this block code and cannot find it anywhere.The motor is in a '73 ford pick-up and the numbers behind the starter are EOAE-D5C and just below that is 18 and 4D3O the base of the dizzy is in line with the base of the intake so I know it's not a windsor. It has 6...
  16. hotrodt

    '90 model powder blue coupe 5.0?

    Did fomoco make a 5 liter coupe in powder blue in '90 w/ a blue interior.Guy swears it's an original 5.0 car but in my 33yrs of living I have never seen a powder blue one that wasn't a 4 clanger.Thanks for the help gents.:flag:
  17. hotrodt

    wiring question

    I put a '89 5.0 in a '93 coupe x 4 banger. I bought a harness out of an '89 gt to match the motor, now i am wondering if i should have bought a '93 gt harness? It's just the computer harness and I believe i will need two other pcs. ,oxygen sensor harness and mass air harness to have all the...
  18. hotrodt

    Identifying this EEC

    How do I identify what car this computer came out of ? It's got a $#@%load of numbers and letters on it. Supposed to be out of an '89 gt auto
  19. hotrodt

    5.0 Bronco swap

    I have an '88 bronco w/ the 5.0 in it, I also own a '93 notch with a 2.3. How feasable is it to swap motor, computer and wiring into this notch? I only have 500 in the truck and 1500 in the car otherwise I wouldn't even consider it. The truck runs excellent. Thanks
  20. hotrodt

    Commonly asked ? The answer

    I could not get my turn signals to work on my '93 notch so I immediatly ASS U ME Dah! that it was the blinker, I promptly did what most do, I replaced the hazzard blinker in the fuse panel. Now once I realized that wasn't the problem I asked you guys and the response I got was...
Top Bottom
Back
Forums
Menu