Search results

  1. Bob Hughes

    Drivetrain Rear Lower Control Arm Help

    Just wondering if anyone has the measurement from center to center of bushings on rear lca. I'm having issues with shearing off the support bolts on my umi lift bars and it's letting the rear twist when I launch. I don't want to weld the pivot brackets and make it a permanent item was thinking...
  2. Bob Hughes

    N2o And Stand Alone Fuel System....

    I posted this in the gt forum haven't heard figured cobra guys might have a little insight.....4.6 2v w/tork tech ported eaton Member In my never ending quest for more power I'm strongly considering a plate kit for the eaton on my car. My tuner was explaining to me that with the return less...
  3. Bob Hughes

    Forced Induction N2o And Stand Alone Fuel System

    In my never ending quest for more power I'm strongly considering a plate kit for the eaton on my car. My tuner was explaining to me that with the return less fuel system the sudden fuel demand between both the blower and nitrous thst I would have a ridiculous lean condition until the fuel...
  4. Bob Hughes

    Drivetrain Tob Psa

    Just throwing this out there just got my 3650 back from Hanlon motorsports (all new internals 26 spline input shaft) put new twin disc clutch in went to put ram tob in and it literally fell apart. The rear flange that snaps into the release arm is pressed on not one piece. I would not put one of...
  5. Bob Hughes

    Engine Teksid Build Update....

    So I've successfully gotten about 90% of my parts together and started assembling my teksid engine. Here's what I've got so far: Teksid block standard bore Termi crank New manley termi rods Mahle forged -16cc dish pistons Clevite tri-compound rod main bearings Arp main and side bolts. New...
  6. Bob Hughes

    Engine Teksid Main Cap Bolts

    I am trying to verify I am looking for the right bolts. I keep getting conflictinganswers. I have a teksid block I'm putting together and need to know which bolts I will need. Ford racing sells a complete kit part # M-6345-A46 and one thing I read says it fits and other says it won't. Please help
  7. Bob Hughes

    Teksid Main Cap Bolts

    I am trying to verify I am looking for the right bolts. I keep getting conflicting answers. I have a teksid block I'm putting together and need to know which bolts I will need. Ford racing sells a complete kit part # M-6345-A46 and one thing I read says it fits and other says it won't. Please help
  8. Bob Hughes

    Forced Induction Time For A New Motor....???s

    Ok so against my tuners warnings I ran my car pretty hard last weekend in the cold NJ air and either spun a bearing or bent a rod. Not even going to take my engine out right now as I have a teksid block prepped ready for fresh start. My main concern is pistons....I'm currently running an m112...
  9. Bob Hughes

    Brakes Steering Wobble

    I've been scratching my head on this one for a while finally addressing it. My car has had a slight wobble upon initial braking pretty much since I bought it, never gotten worse. It starts under initial braking and as you increase braking pressure it goes away. I've just replaced pads and rotors...
  10. Bob Hughes

    Engine 700hp Block Choices....

    I'm going to start building another motor with hopes of 600-700hp. Curious on thoughts of what would be a good block choice. Go new from ford, used cobra, or aluminum from an explorer. I plan on building it myself so buying a short block from wherever really isn't where I wanna go with it. Any...
  11. Bob Hughes

    Door Sensor Problem????...

    I have an 03 gt convertible, was doing oil change and putting on new brake rotors. Just noticed my interior lights are staying on and my alarm won't set (double beep) as though a door is open. What actually tells the doors they're shut? I saw a black push in piece on the back end of each door...
  12. Bob Hughes

    Expired New In Box Maximum Motorsports 79-04 Lca $200 Shipped

    Bought them for my car because I thought I twisted a lca, luckily just snapped a bolt. So I don't need the arms now. Bought them from American Muscle last week. Paid $259 I believe it was. $200 shipped takes em. Fits 79-04 solid axle mustangs.
  13. Bob Hughes

    Rear Spoiler Choices 03 GT Vert.....

    I've looked on various pages for patterns or dimensions on mounting patterns....but haven't found the info I'm looking for. I'm not a fan of the factory rear spoiler on my car...but don't want to have to get holes filled to change it. I don't mind if the new spoiler covers old holes and I have...
  14. Bob Hughes

    Cervinis Cobra R Bumper...

    I am trying to find out what fog lights are used with this. They say there are posts already in the bumper for ford lights....so I'm assuming theyre for the 99-01 cobra lights. I.can't see spending $200 on a pair of fog lights from them.
  15. Bob Hughes

    Suspension Accident with a silver lining

    So Monday night we got some unexpected snow here in NJ...and I got stuck out in it. Lost control of car and hit curb on passenger side doing about 35. Trashed rear rim and front bumper, and possibly bent axle....so I dropped my car off today and geico is putting new rims and tires on passenger...
  16. Bob Hughes

    Forced Induction Case Of The Squealing Belt....

    So like a month ago i put on a NAPA/Gates 537 8 rib belt on the supercharger side of my car as the 545 I had was only like 20% into the tensioner. After doing so, about a week later I developed a squeal on the blower belt system. Replaced both idlers and the tensioner with Thump Racing units...
  17. Bob Hughes

    Brakes Brake Fluid Question

    I'm going to be installing an SLP line lock tonight, and while I'm at it going to have the change out a majority of the fluid in the brake system. Should I upgrade from dot3 to 4 or 5...are there any benefits to it? Have to pick up fluid this afternoon just curious what others have done.
  18. Bob Hughes

    Forced Induction Tork Tech Idler Pulleys

    Started getting a slight squeal from an idler...trying to find out if the idlers tork tech uses for the supercharger are the same as terminator idlers. Any help would be great
  19. Bob Hughes

    Engine Overheating @ Idle

    Having an issue with my car....since its getting colder I start it and let it warm up before I drive. It has now twice coughed out fluid through the reservoir cap, and began to overheat....New 180 degree thermostat....never had a problem before supercharger install...reservoir not...
  20. Bob Hughes

    Forced Induction Anyone Boosting and Spraying Nitrous???

    I'm entertaining the idea of getting another motor and building an MMR900 4.6. Bumping my boost up (probably just keep the eaton unless I find a bigger blower cheap), and adding like a 150-200 shot strictly for the track. Anybody running something similar? Thoughts? I'm calling my tuner Monday...
Top Bottom
Back
Forums
Menu