Search results

  1. chaka

    Oil pan replacement.

    The oil pan on my 85 has rusted out. Had a pinhole leak in it. When I poked it with a screwdriver it got bigger. The whole pan is pretty rusty and I have a spare lying around so figured I would change it. For those of you that have done it how high did you have to raise the engine to get the...
  2. chaka

    Where can I buy stereo Faceplates.

    Just wondering if there are any stores that sell these or online sites besides E-Bay. Thanks
  3. chaka

    88TC swap into an 85 Mustang

    I would be getting the complete motor, accessories, turbo, wiring harness, computer, and intercooler. Everything to drop it in and run it. What would be a reasonable price for this setup? I think I know what needs to be done, but what am I missing? 1.The gas tank will have to be switched...
  4. chaka

    Front Control arm questions

    I updated my front end with 96 Cobra brakes, spindles, and rotors. Now the Camber is all out of sorts. I adjusted the stock camber plate and it is maxed out, but the wheels are still off. (top out, bottom in) I was hoping to swap some T-Bird control arms in to kick the bottom out, but not...
  5. chaka

    Machine Shop Recommendations

    Hey guys. I have some heads I need tanked and checked and was looking for a shop to do the work. Also need a 3 angle grind. What shops do you recommend? Thanks
  6. chaka

    Engine Codes???? What is wrong?

    I just pulled the codes on my 86 302. in the order they came out. 31, 21, 51, 53, 63, 22, 31 Codes 53 & 63: I have checked the Ref. Voltage and the actual TPS. They checked out. 22 The MAP is brand new. Why are all these codes popping out? Did I fry my comp? Thanks
  7. chaka

    Insurance Question/ Swapped Engines

    I have almost completed my 460 swap. Little things here and there. Not worried about insuring and registering it, but what happens when I get pulled over and the info the cop has says I have a 4cyl?? What about inspections? It should be emissions exempt, but I think the added cylinders...
  8. chaka

    Quick question about engine codes

    Pulled the codes on my 86 F150 302 the other day. The codes were 23 31 a code for the engine coolant temp. and a code for the PIP. Changed the PIP and the code disappeared. However for the TPS. I tested it as the manual said to and it checked out. Why would the code be there...
  9. chaka

    Engine still runs like ass.

    This is a stock 86 302 in a F-150 4x4 So far I have changed the TFI, coil, plugs, wires, cap, and rotor. Timing is set properly. Compression check done. 150-145 across the board. #1 a little low at 140. In park and neutral the engine will run decently with a little shake. and rev up...
  10. chaka

    What the hell is going on?? BackFires

    What the hell is going on?? MisFires This is not mustang specific. Having some problems with my F-150 that are driving me batty. Last week the truck would die and restart when it cooled off. Figured it was the TFI and I would change it this past weekend. Then it started acting real funky...
  11. chaka

    I am stumped??? Any advise

    This is not 2.3 specific. Actually my F-150 is acting up. It is a 302 w/ AOD. Last week it started to stall and then be able to restart after it cooled down. Figured it was the TFI and when I got a chance I would change it or when it completed died. Then it started acting up on Friday...
  12. chaka

    Prep for paint???? Pics of notches...

    Hey guys, Car needs a paint job badly. What kind of prep work can I do that will keep costs down at the auto body place? I need some info. Any recommended body shops in eastern MA? I am just looking for a simple paint job. Any pics of the four eyes for some ideas on paint color. Thinking...
  13. chaka

    Can I make this stuff work together?

    So I have decided to put the 2.3 w/ the mazda 5-speed in the II. Do you guys think it is at all possible to use the ranger pedal assembly to do this? Can I swap the pedal assemblies between my 79 (was manual) and the II (auto)? Or am I going to need to scavange some parts off of a II...
  14. chaka

    Bellhouse Pattern

    I was hoping to bolt in a 2.3 out of a 90's ranger I have. Basically just looking to replace the wheezy V6 currently in there. The ranger has the mazda 5-speed. I know I would have to get a flexplate to match up. Do not plan on putting the 5-speed in as of yet since it is hydraulic clutch...
  15. chaka

    engine choices???

    Any of you guys swap in an N/A 2.3 EFI into your mustang II? I am have a complete donor car available with that engine (90 ranger 5-speed) was a peppy car. I also have the carbed 2.3 turbo sitting around. And the 5.0 is plentiful if I went that route. What do you guys think? I woudl...
  16. chaka

    turbo coupe on ebay cheap

    http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2460633739&category=6783 figured someone may be interested.
  17. chaka

    Swapping engines and Suspension Question

    I am about to purchase a Mustang II. It currently has the V6 w/auto. Not sure on the year. I can't be picky anyway. Does the 2.3 and V6 have the same bellhousing? Plan on swapping a 2.3 turbo in and was hoping to use the auto till I found a good manual tranny. Has anyone used a T-5 or I am...
  18. chaka

    Front suspension??

    I have swapped over to 96 Cobra brakes in the front. As of now I still have the stock 79 balljoints and tie rods. I know I need to get 96 Cobra ball-joints, but what year tie-rods should I use? I think wish recommendedusing the 85-93 GT tie rods, but can't remember.
  19. chaka

    Is this a decent price. (pics included)

    So he said $1000 firm but have yet to hear it run. Just snapped some pics and left. Will be finalized Friday. The interior is nice. Rug is faded, but no stains. No tears in any of the seats. Only major rust is on the driver's outer door. Rockers and floor pans good. Where the subs meet the...
  20. chaka

    Building up a carbed 2.3 turbo

    I have the complete engine. The block is going to need the ridge reamed, but once this is performed do you think a hone is needed? I can see the original cross hatching. Plan on installing some dished forged pistons and rods from an 88 TC to lower compression. What tolerances should I have with...
Top Bottom
Back
Forums
Menu