Search results

  1. ib_steed

    Stock Ford T3 compresser Intake diameter??

    I need to know the size of the intake flange of the compressor of a stock T3 on an SVO for example. (where the tube connects between the VAM and turbo) I am not able to measure it at the moment but i need to know within a few hours. Thanks guys, -Ryan
  2. ib_steed

    Building a t3/t4 turbo. Would this work?

    I'm trying to replace my dead turbo, I would like a t3/t4 setup. I havent found exactly what i need on e-bay, but i have found parts of what i need... Could i put my (water-cooled) center section from my SVO turbo on this...
  3. ib_steed

    Fixing turbo exhaust leaks. Need advice b4 I start.

    OK, the last problem i need to work out of my engine is an exhaust leak. There is a leak in the exh. man-to-turbo, AND between the exhaust turbine housing of the turbo and the 90° downpipe section. I will have to remove the downpipe to fix the leak, problem is that the bolts are seized. Any...
  4. ib_steed

    Anyone seen these brake mods for II's?

    I found these from a flyer at a local parts store. I found their web address, and it seems like they have some good parts for us! check it out and let me know what you think. Zig's Street Rods (scroll the left part all the way down and click on "Mustang II Components") Anyone have any...
  5. ib_steed

    Fuel injection noise

    Anyone else's Fuel injection sound like sprinklers? They are pretty loud, loud enough where i can hear them over the idle. I'm using brown top injectors from the donor '86 SVO. -Ryan
  6. ib_steed

    Where to get an A237? $$$??

    just a quick question of where it is possible to get an A237 camshaft from? How much would one of these baby's set me back? Anyone know an actual part number for the "legendary Ranger roller" cam? anyone got stats on it? Thanks everyone, -Ryan
  7. ib_steed

    Tach and Turn signal problem

    Ran into a problem with some electrical on my car the other day: My tach and turn signal went crazy at the same time. The tach just doesnt work anymore, sits there on 0 all the time. The left turn signal turns on solid, the right still blinks, and both sides blink when the emergency flashers...
  8. ib_steed

    Front suspension rebuild

    I'm looking to redo my front suspension. anyone have experience with this? approximate costs and different options? options for shocks/bushings/sway bars? anyone make A-arms for MII's? I have springs i got from Racer Walsh, but havent put them in. I'm looking to do that in the next few days...
  9. ib_steed

    Rough idle/Low vacuum/Bogged down accel

    been trying to tweek the car some. although it is fast, its still not putting out the power that it aught to. the idle has been rough since i started it last week, and it has never had more than 6" vaccum on idle. it still shows 10psi on WOT, and 20-25" vacuum on decel... swapped my volvo...
  10. ib_steed

    Anyone ever used an HKS BOV?

    I'm talking about the SSQV. The one that looks like an overgrown bullet. It seems like these are of a good design. I might have access to a used one. (will find out the price tomorrow) And i can get a new one for just over 200 at the local speed shop. not bad considering some prices ive seen...
  11. ib_steed

    IT RUNS!! just a problem or two

    Hello again Stangnet. Recently finished my turbo swap, what a job! 75% custom work and fabrication. today, i worked through a few electrical bugs, (providing power to the ECU on start/run, and backwards fuel pump wiring) and got it to start. got the timing set on 20*BTC with the spout pulled. It...
  12. ib_steed

    SVO oil cooler gasket

    I'm looking to replace the gasket on the water-type oil cooler from an '86 SVO. (between block and oil cooler) it is a little larger than the gasket of the filter that attaches to it. that would make my job too easy. :rolleyes: anyone know where to get a replacement for this gasket? maybe an oil...
  13. ib_steed

    no intank fuel pump!!

    Here's one for you guys... Will an external fuel pump (near the tank) work without an intank pump? My concern is that the fuel might leak back into the tank from the pump and leave it dry for the next start. Anyone know for sure if this is a problem or not. My '75 has no intank pump. Thanks...
  14. ib_steed

    Rev limit on an LA3?

    I'm curious what the Rev limit is set at in an LA3 computer from a TC. Is there any way around it? (besides an MSD ignition system, its on the wish list...) I'm looking to hit 7k, maybe 7.5k. thanks! :banana: -Ryan
  15. ib_steed

    Where to plumb a BOV

    I'm wondering, where is the IDEAL place to put the BOV in an intake system with an IC? as close as possible to the TB? or as close as possible to the turbo? now's the time for the technical answers!! ;) My situation: Its a '75 MII. Total custom job, but fun. I've installed a volvo IC and am...
Top Bottom
Back
Forums
Menu