Search results

  1. JamesBaumann

    Tuning Question

    Does anybody know if I can use the ford IDS to tune my combo? 331 Edelbrock heads E303 24lb injectors etc. Any help would be great.
  2. JamesBaumann

    Hypothetical HP Q

    Hey guys, just looking for some opinions here on my combo. This past May my stock 5.0L bit it :notnice: I am just finishing putting together my longblock which is a 331 stroker bottom end with FRPP E-303 cam, and edelbrock performer 6037 heads. My question to you guys is what would you...
  3. JamesBaumann

    2.02" or 1.90" valve for street stroker

    Hey guys, I know that this has been covered before, but I am just looking for a couple opinions directed more to my question. I have just put together a 331 stroker shortblock with the FRPP E303 cam. I'll likely be using a set of 1.7 RR to give me approximately .530" lift. This car will be...
  4. JamesBaumann

    2.02" or 1.90" for street stroker

    Hey guys, I know that this has been covered before, but I am just looking for a couple opinions directed more to my question. I have just put together a 331 stroker shortblock with the FRPP E303 cam. I'll likely be using a set of 1.7 RR to give me approximately .530" lift. This car will be...
  5. JamesBaumann

    Engine Removal

    I ran a search and looked through the tech sticky but couldnt really find what I was looking for. Does anybody happen to have a tech article for engine removal on a 94GT. I seemingly blew mine up today, so I figured a tech article might make the removal process of the motor a little more...
  6. JamesBaumann

    Quick stereo question

    I ran a search but couldnt find any answers to my question. I have a 94GT with the base (non-mach) stereo. I am wiring up my own stereo with my own 4 channel amp to power the speakers. My question to you guys is, where are the stock amplifiers located? If there are any. It seems all of the info...
  7. JamesBaumann

    pressure plate question

    Hey guys, I did a search and found nothing. I am currently trying to pull my pressure plate off and there are three what appear to be retaining tabs holding it in. Can anybody give me any help on how to remove these tabs and take off the pressure plate? Thanks for any help guys.
  8. JamesBaumann

    Drop spindles

    Does anybody know of anywhere where a guy can get a set of drop spindles for a 94GT? Thanks for any help guys.
  9. JamesBaumann

    Centerforce Comparison

    Guys, Can anybody tell me the difference between these two kits? the 1048 is supposed to be the fox one, and the 1057 is the 93-95 one it says? However, the king cobras are all the same, and the specs on these two are all the same so I dont know what the difference could be. The reason I ask...
  10. JamesBaumann

    Difference Between Mid-Pipes?

    Anyone know the difference between an 87-93 x or h pipe and ours on 94-95's? I found a guy selling one that he pulled off of his 91GT but, it seems as though the 87-93 and 94-95 have different part numbers. Just wondering how much different they are. Thanks for any help.
  11. JamesBaumann

    quick exhaust question

    Might be kind of a dumb question, but none the less I would still like an answer to it. Does it matter which way around you mount a muffler? I have two of the same 50 series delta flow flowmasters with the same side inlet and outlet. I noticed that in our cars the mufflers both have LH...
  12. JamesBaumann

    IAT intake chip

    http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&ih=003&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=130121508633&rd=1&rd=1 Im not a particularly big believer, but I just thought I would see if anybody has had any experience with these things. I actually bought that exact item, mainly because I...
  13. JamesBaumann

    Ebay CAI kit

    I just bought a 1994 GT and I just have a question about this CAI kit. http://cgi.ebay.ca/94-95-FORD-MUSTANG-5-0L-V8-COLD-AIR-INTAKE-W-FILTER-GT_W0QQitemZ160123185600QQihZ006QQcategoryZ38634QQrdZ1QQcmdZViewItem Where are the MAF and IAT sensors supposed to plug into? Thanks for any help...
  14. JamesBaumann

    Tri-Ax shifter handle Q

    Hey guys, I just had a question about this product. http://www.partshopper.com/shop/Steeda-Tri-Ax-Shifter-Handle-m73.html Will this shifter handle only bolt up to the tri-ax shifter or can I install it right to my stock t-5? I think the product description says it bolts right up to a...
  15. JamesBaumann

    Turbo Compression Question

    Ok guys, I have a quick question here. I have a cylinder head that I am currently using in my n/a 2.3. It is ported & polished, has the roller cam & roller followers, and it is shaved .050". Here is my question. If I wanted to build a turbo motor for this car, could I still use this cylinder...
  16. JamesBaumann

    Shifter Q

    Are the shifters on the 5.0 t5 and our 2.3 t5's the same? If I wanted to buy a steeda tri-AX or a Pro 5.0 would I need to order one specific to the 2.3 or just the one advertised as bolting up to the 5.0 foxbody t-5? Thanks for the help.
  17. JamesBaumann

    Head Milled .050" - Which Grade?

    I've got my head milled .050" and I am wondering if pumping mid-grade over regular-grade would give any benefit because of the increased compression. Is .050" enough to have it be worthwhile to run mid, or not? Thanks for any help.
  18. JamesBaumann

    Muffler Offset

    Which muffler am I going to want? Center in/outlet? Center inlet, offset outlet? Offset in/outlet? I am ready to order my FlowMaster 50 series Delta Flow, but I want to make sure I get the right one. Thanks.
  19. JamesBaumann

    Update: Head Swap Complete

    So guys, I finally got my car running again tonight with the new cylinder head. Mods include: - Ranger Cam & Followers - Port & Polish - Shaved 0.50" I must say, I am very relieved and disappointed at the same time. I am relieved in that the car runs again and now I can sleep again...
  20. JamesBaumann

    Intake Temp Sensor

    Do we have one of these? I think we should because of the EFI and ECU, but I have never heard of nor seen one on these vehicles. Anybody know?
Top Bottom
Back
Forums
Menu