Search results

  1. BennyBlown2v

    1987 5.0 5pd Coupe $4500

    isting my custom painted blue '87, 5spd, for sale. I am getting rid of this since my dad and I are building another car and I don't have the time or money right now to continue playing with this car. I have done an extended tear down and rebuild *HERE* of most of the mechanical systems and...
  2. BennyBlown2v

    Turn signal issues! '87 5.0 swap

    Hey guys, here's the break down of my car: 1987 2.3l car 5.0 swapped Previous owner says it has a 91 engine/dash harness A9l 1993 multifunction switch The issue: I'm restoring this car and dealing with all sorts of electrical issues - all of which I have figured out EXCEPT the turn...
  3. BennyBlown2v

    Are these S197 seats?

    Hey guys, I just bought an 87 notch with a buncha weird parts in it, and can't figure out these seats! :rlaugh: They obviously have other rails on them, but I think they are 2005+ v6 cloth seats??? The reason i need to know is so I can get some headrests, apparently the ones that were in...
  4. BennyBlown2v

    2009 IndyHP Street Car Shootout!!! Indianapolis, IN - July 5th@O'Reilly Raceway Park

    My car club is hosting it's second annual drag racing event! This event is open to cars as well as bikes. ------- What: A day of quarter-mile drag racing with IndyHP, complete with classes and tough competition. Fun runs will also take place during the entire day for anyone wishing to...
  5. BennyBlown2v

    No more Mustang!

    Well, it's final! The new owners drove from Tennessee to pickup the car today. I'm glad to have her sold after having it listed one place or another for almost two years (this Nov.), but it hurts taking a loss on all the time I've put into it :( Plans are buy a daily driver, finish my drag...
  6. BennyBlown2v

    What's the best hitch setup for a 99-04 Mustang?

    OK so far I haven't been able to sell my car, and it's really starting to piss me off lol... So I'm thinking about just throwing a hitch on the stang so I can tow my bike (one of the things i was gonna do if I could sell this and buy something else). I got the idea from a local guy who has a...
  7. BennyBlown2v

    GT fuel level sender on cobra twin pumps?

    Just wondering if the fuel lvl senders/arms are the same on the cobra pump setup and the GT basket? I got a deal on a cobra setup lined up but it comes without fuel lvl sender and I can't remember for the life of me if they are the same (i had cobra tank/pumps but sold it cuz I needed the money...
  8. BennyBlown2v

    03/04 IRS drag setups?

    Anybody have any experience with getting good short times from 03/04 IRS's? I can cut 1.70's-1.72's on my ET streets but that's it, and I'm on a stiff autox/aggressive street setup right now. What I'm really looking for is what shocks/struts spring rates (coilovers) should I go with?? Right...
  9. BennyBlown2v

    HID's installed!!! VIDEO INSIDE!!!

    Finally got around to installing some HID's from Standmods.com that a member on here (MrGame) sold me months ago (thanks buddy!). heres a little video!!!:flag: http://youtube.com/watch?v=BtWZwWohk4E They are great, and even at 8000k they are not "too blue" and illuminate better than...
  10. BennyBlown2v

    New dyno numbers + vid!

    Went to a dyno day today to mess with my air/fuel/timing. I ended up running 429rwhp/406rwtq at 11.8 afr, then I leaned it out 2% on the xcal 2 and it put down the exact same numbers but with a 12.4 AFR :rlaugh: Unfortunately I only got the printouts of the ugly AFR run, oh well! I won the...
  11. BennyBlown2v

    New personal best 1/4!!!

    New personal best 1/4!!! PICS!!! Took the car out for the first time in almost two years today :rlaugh: for a car club track event!!! I got a set of ET streets to replace my ET street radials to be a bit softer on the drivetrain...and I don't know what everybody complains about them being hard...
  12. BennyBlown2v

    It lives! Video

    Well I finished putting my 8-rib kit on today, after waiting for two weeks to get an idler because Reichard Racing was dicking around, hah. It's the BGGPerformance kit and its TOP quality. The belt was VERY hard to get on at first because of the way you have to push the tensioner, but I ended...
  13. BennyBlown2v

    Stangmods.com Bi-Xenon HID install directions?

    I picked up a Bi-Xenon HID kit from a member on the boards (thanks dude! :nice: ) and I don't have the original install instructions. Everything looks pretty straight forward, but there is one wire which I have no idea where it goes, and some install directions would be good to have. Anybody...
  14. BennyBlown2v

    Watch out GT500KR! ~ZR1 pics inside!!~

    http://jalopnik.com/cars/detroit-auto-show/2009-chevrolet-corvette-zr1-revealed-officially-334923.php Pretty much t!ts IMO! I love the clear hood to show off the blower (or at least the cover for the blower lol). Who was it here who had a Mach 1 hood with clear cutout and KB setup??
  15. BennyBlown2v

    Yet another toy in the garage... :)

    I just won a 2002 R1 on eBay! It's silver-gray/black setup. I went and looked at it and test road it a little bit today and its damn near PERFECT shape and rides awesome. Previously I had a GSX-R 600 so this should be a nice step up in power :D Heres the only pic of it I have (from ebay...
  16. BennyBlown2v

    Starting my winter build!

    Well I'm pretty excited - I ordered a buncha parts last week and stuff has started to arrive and I'm getting anxious to put it all in hehe. :nice: So far we have: 03/04 cobra T56 (total swap, everything needed) Steeda Tri-Ax shifter for T56 (on order) 03/04 cobra aluminum driveshaft 03/04...
  17. BennyBlown2v

    hah, found something kinda cool (google)

    So I typed in "2004 mustang gt" in google and guess whats on the top 3 images!!! My car back in the day! :rlaugh: Oh simple times...just prokit springs, tokico HP blues, o/r x, chin spoiler, and grille delete :nice: What other cool stuff have you guys found when searching for...
  18. BennyBlown2v

    Idiot drivers (WRECK PICS INSIDE)

    Well, my dad was going to get his car washed, stopped at the end of his street, looks right, and BAM some idiot crosses the center line and turns INTO the left lane!!! The guy who hit him was a total moron, trying to tell the cops my dad ran the stop sign...LOL...which wouldn't have mattered as...
  19. BennyBlown2v

    Went wanglezz!

    Changed it up a bit, took the wing off! Sorry for the crappy quality of the pics, they were taken on my now-broken camera phone.:mad: ^^There are small black plugs in there now, put them in RIGHT after that pic actually lol I think it makes the car look a bit lower....but I...
  20. BennyBlown2v

    Hehe look what I get to drive!

    My dads new whip: Audi RS6 Engine Type: V8, Twin-turbo Displacement cu in (cc): 254 (4172) Power bhp (kW) at RPM: 450(330) / 5700 Torque lb-ft (Nm) at RPM: 413(560) / 1950 Redline at RPM: n.a. Brakes & Tires Brakes F/R: ABS, vented disc/vented disc Tires F-R: 255/40 R18 Exterior...
Top Bottom
Back
Forums
Menu