Search results

  1. I

    combo help

    I keep having a lot of trouble figuring out what kind of engine setup I want to run and every time it seems like I'm going to be able to do something I either have to pay a bunch of money out on unexpected breakage, tickets, girls etc. and I figured I'd have a very nice H/C/I setup by now or a...
  2. I

    260whp

    Ok have a question or two. How far of a stretch would this be? Could I make 255whp with a fresh factory bottom end, stock E7 heads, a TMoss lower intake, an XE258HR comp cams that has a 1300-5300rpm powerband, 1.6 roller rockers, UD pulleys, BBK unequal headers, MAC o/r H and MAC catback...
  3. I

    speeds in each gear

    Ok, i've been running w/out a tachometer for a while and was wondering at what speed everone's at at 5000rpm with 3.73 gears with stock sized tires.
  4. I

    Crane 2020 cam

    Anybody used one?
  5. I

    Spacers for clutch quadrant

    I've got a UPR triple hook that I'll be putting in as soon as I can remove the damn little piece of the quadrant from my clutch pedal called a pawl. Somebody said I'd need spacers for the new quadrant. Is this true and what size do I need and where do I get them if I do?
  6. I

    Clutch fork

    I'm trying to get my factory cable to go back in my clutch fork and I can press my clutch fork back about an inch to an inch and a half. Is this ok?
  7. I

    Aluminum Driveshaft

    Well I ordered one of these yesterday because of a vibration I had with the stock one. Anybody notice a SOTP difference with one of these. Doubt I will, but it never hurts to ask. :D :SNSign: I also ordered a new quadrant/fwa. Are these a PITA to install?
  8. I

    Green92LX been skill-honing

    http://videos.streetfire.net/video/13929996-204E-47EE-B99C-625C278AF570.htm :lol: J/K This is funny as hell.
  9. I

    BBK SSI curiousity

    Does anyone know the flow numbers on this new intake. I'm not planning on getting one at the moment, but curious for the future.
  10. I

    SCT tuning

    Does anyone know if the SCT mail-order chips can be reflashed?
  11. I

    cam and spring q's

    I just turned 17 and I'm on very tight budget. I'll be getting my crank and flywheel back from the machine shop by Thursday and I'll be ready to start putting the engine back together for the most part. I've got a set of 950-16 dual valve springs from Comp Cams that were given to me free of...
  12. I

    Carbon buildup

    How can I remove carbon from my head ports? The problem I'm having is they're already out of the car and off of the engine. Thanks.
  13. I

    What to do?

    I've got the motor tore down in my car. Sure enough my bearings were bad in it. So, I'm going to be getting new bearings, rings, gaskets, springs, motor mounts, and a timing chain. After talking with someone tonight I'm curious as to whether I should go ahead and install a cam or not. Before...
  14. I

    New belt route.

    Pulled my engine out around noon today getting ready for the teardown and I've decided since I've got a non-working air conditioner and air is provided by the 2-60 system, plus the fact that I'm not using catalytic converters, aaaannnndd PLUS the fact that my belt is old, I've decided to ditch...
  15. I

    forced induction effects due to stroke

    It's not going to affect me personally at the moment, but I'm curious to know why people recommend shorter stoke combos for blower applications. Just curious. Thanks.
  16. I

    5.0. H.O. rebuild

    I've got the tranny out of my car and it's just an engine now. I've got a T5Z. Need a King Cobra clutch, and a few other transmission related parts. The motor has low oil pressure readings, around 25psi warm and sometimes, rarely, will fall to zero when the gas is let off of. I'm thinking it's...
  17. I

    transmission woes

    Some of you may have read that my transmission was fugged in another thread. My buddy totalled his car a while back and I was going to check on his. The only thing I ever saw wrong with it was that lately it didn't want to downshift into second. Can't remember if it was like that in other gears...
  18. I

    MAC catback

    I have a MAC catback right now and I was wondering if I cut my tails off and welded in a turndown would it be louder? Would it be just like running Pro Dumps?
  19. I

    clutch fork

    Well, got the transmission out and what happens? I break one of those tiny ass clips off of the shift fork. Could I weld it back on without having to pay $50 for a new one?
  20. I

    throwout bearing replacement

    How much does this usually cost? Mine took a crap.
Top Bottom
Back
Forums
Menu