Search results

Ok so this is hard to do but I'm putting my baby up for sale. Its been a project since I bought it and nearly everything is finished but I have just lost interest in it unfortunately. I bought the car in 2005 from a friend who own a re builder lot it was rear ended and had originated from Texas...

I'm parting out my 99 cobra I bought wrecked and due to the Scrap texas title. The body is straight and fixed now I used the car at the strip. I had the engine work done less than 10k ago it has Mahle Forged pistons, scat forged rods, stock cobra crank, along with balance/machine work, it is...

First off this is a parts car there is no damage to the vehicle but I bought the car with a scrap title and played with it on the track but ive lost intrest and im ready to let it go.. Ok the car itself is a 1999 cobra it has 58,000 miles on the body, the engine has 5k on the rebuild and the...

Ive got a sohc 4.6 out in my 98 gt, I bought the engine a couple years ago out of an 02 cop car it had 5000 miles on it when I put it in and it hadnt had 4000 miles on it since then but I loaned it out like and idiot and got it returned with a rattle and its sit since now im just pulling it and...

Ive got several parts for sale lets start with the hood ive got a 2it.5 inch i believe maybe 3 but it is a cervinis cowl hood its in great shape its not a cheap knock off its straight and in great shape ill take 200 obo, Ive got a set of tan 99 cobra airbags they are in great shape no cuts...

Ive got a T45 trans out of a 98 gt. It was installed at the dealership around 4,000 miles ago ive had 0 problems out of it im just switching to a T56 the trans is still in the car and can be driven or whatever if need be. It has a steeda tri ax shifter with a steeda shift knob ill let go with...

Ok ive got a contraption here haha, ive got a 2003 mustang gt and have installed a 1999 cobra engine with a T56 trans, they came from wrecked donor cars and luckily the engine had a vortech v1 blower so its installed on the engine which now has mahle forged pistons, and scat forged rods at 11lbs...

Well im going to go through my engine and im seeing which places you guys have had the best luck with i dont want to go for broke on this just want to make my 99 cobra engine a little stouter, what all do you guys think i should do on a semi budget build as the car has a V1 vortech blower on it...

Hey guys my 99 cobra motor started making a deep knocking sound a while back so I parked it and tore into it today and found that there were NO rod bearings that had been spun but i did find like a ball check valve sort of thing in the oil pan along with a small retainer like clip that fits the...

Hey guys my 99 cobra motor started making a deep knocking sound a while back so I parked it and tore into it today and found that there were NO rod bearings that had been spun but i did find like a ball check valve sort of thing in the oil pan along with a small retainer like clip that fits the...

Alright guys you might think im full of it but my buddy just bought the MMR turbo car and it is unreal fast, we took it down to E.T raceway an 1/8th mile track and being his first time in a street car that fast he ran a best of 5.9 on a MT e/t street tire, spinning like hell. The best part is...

Ok guys ive got a 98 gt with a PI engine with about 7k miles, bbk longtubes, 80mm maf, 24lb injectors, bbk x pipe, mac cat back, 4:10s, steeda tri-ax,and underdrives, it ran a 8.8 in the 1/8th on MT e/t streets im wondering if i should go have it tuned or does it run about normal? Its not gotta...

Ok guys ive bought an 2003 mustang gt with a salvage title the down part, but heres the good part, ive just done the body work and put on a Cervinis 3 inch cowl hood, 03 cobra rear bumper, cobra side emblems, and 18-10.5 chrome saleens. Interior is from a 1999 cobra from cluster to seats to...

Heres the first car its a 1998 mustang gt 3500 mile 2002 PI engine BBK LTs, BBK off road x pipe, Mac 2.5 catback grantelli MAF 80mm w/24lb injectors, BBK adjustable fuel regulator underdrives if it matters steeda tri ax, and 4:10s Give me some estimated Ets for it as i have just...

Car:1999 Cobra Mods: vortech supercharged T56 and yadda ya Background: Car was bought earlier this year with light rear quarter damage very cheap. The car itself has 51000 miles on it, but ive done my research on the forums and located the previous owner who told me that at 47k he had a...

Hey guys i had on my drivers side the secondary timing chain tensionor came loose allowing the secondary chain to break. What all will i have to do to change that out what should i change and how hard is it the engine has 4000miles on it now, so let me know and the motor is vortech supercharged...

Alright guys im lost maybe you can help ive got a 99 cobra its got a V1 vortech supercharger @10lbs of boost hooker headers and right now only a hooker x-pipe installed (no cat-back) i bought it wrecked and drove the car a couple times and it ran fine, and pulled hard I talked to the previous...

OK guys ive been looking for days now but I finally got a lead on the cobra I bought through a local rebuilder!! Heres the sight I found with the previous owner telling all he's done to the car whats the chances !! haha So give me some estimates as I really have no idea as to guessing times in...

Hey guys i just bought this 99 cobra that had been lightly rearended and the guy was driving it around the lot and it ran out of gas. I gased it back up and tried to start it and it hit every once it a while but never to much extent. The reset switch is fine and i hear the pump kick on to prime...

Hey guys I just bought a 1999 cobra the other day that had been lightly hit in the rear, I ran a carfax report on the car and it came back that it was from Austin Texas and was hit by a 2005 dodge dakota while parked along the road. The car is Red with 18" saleen wheels about a 3" cowl hood...