Search results

most common thing to make a 5.0 surge? I got a 1990 mustang 5.0 with B cam headers exhaust and cai... Whats the most common thing that makes one surge? It's just about stoped the surging... dose it a little every now and then when it warms up.. and can someone explain to me about timing? from...

Tomarrow im taring in to replace my headgasket on my 90 gt with a 5.0 and b cam otherwise stock motor. I just put the motor in there not to long ago and it just wouldnt run right. had alot of people look at it, replaced alot of parts, the car was put on 2 different computers and would NOT throw...

ok guys, well I finally got my motor together and put in the car... its stock with a B cam and heasers and CAI nothing special. well atfirst it had a bad miss to it, 2 injector wires got crossed... well the miss got better but #7 still wasnt firing and its got new plugs and wires... well the...

ok well, i just put another motor in my 90 gt finally and its stock with a b cam and bbk headers h pipe and flows dumped... well it cranked up and everything and idles but its got a miss to it or wsomething, its got new plugs and wires in it also, its like when i revv it a little its just...

ok, well I just baught a 93 T-bird motor for my 90' GT n was wondering what all I had to swap to get it in the mustang? I also ordered my B cam 2day, If anyoine knows what all I gotta change out please letmeknow, I'm putting the camin thisweekend and wanting to swap everything over to make it...

ok guys, well first of all a big thanks for all thd guys whos answred all my questions about the 351 swap and everything i really apprecaite it and even know i didnt get to do it due to im lazy and found a HO motor it really helped me understand alot more about it all... ok heres the fun part...

ok, well some might know the oil/water mix problem with my car and I've searched and searched so much I cant find a 5.0 roller to drop back in its place.... soo my buddy up the road has about 8 351 motors and I wanna see if I can drop it in and use the stock EFI and disturbur and what all would...

well a guys got a exploer motor out of a 90s explorer with about 65000 miles will it work in my 90 gt? will the intake work or what? i got another complete motor but the blocks cracked so what should i do and will it work? and is 400$ to much?

ok, big question guys, I never found out why the oil/water was mixing so... I baught another 5.0 out of a 89 gt with 80,000 miles on it and WhileI gotit sitting out here looking pretty I'm gonna put a B cam in it and drive it! Some one was telling me on here I think it was thumper to advance the...

I put my motor back together and got it runing (like ****) and its smokin like crap and i drained the oil out of it which i know i didnt get all the milky oil out and put in new oil and filter just to flush it out and the oil in there now is milkyyyyy i dunno if its from mixing with the other...

ok, Well some of you might know I been having water/oil mixture problems in my 1990 gt and the guy said the lifter went down, he dove it for about 800miles with the lifter down (for whatever reason) and water/oil wasnt mixing untill he pulled the intake off and put a new lifter in it and put it...

well, I been having water mixin in my oil on my 1990 5.0 gt and i took the heads off got em tested and he said he put about 50psi to em and they didnt leak a bit so.. what else could it be? i baught the car from a guy i know and he said a lifter clapsed(sp?) and he had to put another one in...

My buddy has a 512/516 custom cam he took out of his mustang that ran like 8.40s in the 8th pretty much a stock stang on street tires with headers and a few other bolt ons and changed the cam out to a different one and put nitrous on it he said he'd sale it to me for about 75$ he said it went...

Well, Heres what I plan on running as far as my set-up and wasnt sure what RRs to run with it. ported and shaved E7TE heads B-303 cam kit Dual springs/moly retainers and keepers lower ported by T-moss and either 1.6 RR's or 1.7, wasnt sure which ones?? also wheres a cheap place to...

Well, I still havnt found out why yet. I havnt gotten the heads checked yet cause its going to cost me 80$ for the pair. The heads gaskets looked new and so did the other gaskets when I was taring it down. the cylinder walls look great arnt scared or anything either. there was alot of water...

Whicn one should I go with? Now my motors stock, I got it all tore apart now cause it has water in the oil, the head gaskets are good, motors brand new from autozone and the guy said the lifter broke and had to replace it and after he put it back together it started smokin white smoke so he...

I'm looking to buy a cam kit for my 90 5.0 real soon, I just want one thats kinda lumpy but not to lumpy but just sounds good. the mtor is stock other than BBK EQ LT headers and K&N CAI. whats would be a fairly cheap lumpy cam for it that wont mess up the motor? thanks alot!!

Hey yall, Im new here and new to the mustang world. I've went from lowerefd trucks to bagged trucks to a z71 (still got) and now I finally found me a Fox GT 5 spd like I've always wanted. I got it really cheap from a older guy I've known for a while now and its a 90 gt 5.0 with a autozone motor...