I saw a post aboot this a while back and i think the general concencus was that 78mm would be overkill on a NA setup but with boost it would be a good piece. I pretty much agree with that. I think its kinda cool looking IMO
You only flow as much as your weakest link - if your heads flow 165cfm peak and you have a TB the size of a trashcan you're still only tapping in on 165cfm of that. Same for intake manfiold,MAF... ect.If I didn't have a 75mm I would go with the 78. I'm putting stage II cams in so the bigger the better for me.
You only flow as much as your weakest link - if your heads flow 165cfm peak and you have a TB the size of a trashcan you're still only tapping in on 165cfm of that. Same for intake manfiold,MAF... ect.
man, i was actually thinking about this product for my next future mod.
should i jus get a bbk plenum and bbk 75 mm throttle body then?
any imput from the wise is always good.
Don't not buy it (even if mating it up to the intake piping might be almost impossible) just because it wont help for sure over 70 or 75's. We're just saying that buying bigger isn't needed to make power in this case, it'd be like buying bigger shoes to run faster; if you don't need bigger shoes you wont run any faster - ya dig?man, i was actually thinking about this product for my next future mod.
should i jus get a bbk plenum and bbk 75 mm throttle body then?
any imput from the wise is always good.
Anytime man, I doubt I even need all 75mm's with ported heads revving to 6300a plunum and 75 mm throttle body would be best FIT then huh?
because i have the bbk plenum and throttle body combo on my 98, and its great. however, i never really heard anything about the throttle plunum until today. and like a few others, i didnt think it would be a big differense from 75mm to 78mm. but, i guess so.
but your imput made sense, thanks chris.
Anytime man, I doubt I even need all 75mm's with ported heads revving to 6300
For sure - bust my ass tues-thurs with classes then spend a good amount of the rest of the week writing and reading. But i do have fri-mon technically off. But paint definitely took a beating the 3 or so months it was being wrenched on since i never had the car cover on and couldn't wash/wax it with no hood on.like i said, good imput mang, and hows your school schedule this quarter?
ne time for a shoot?
For sure - bust my ass tues-thurs with classes then spend a good amount of the rest of the week writing and reading. But i do have fri-mon technically off. But paint definitely took a beating the 3 or so months it was being wrenched on since i never had the car cover on and couldn't wash/wax it with no hood on.