IntenseBlue
New Member
- Jul 10, 2005
- 946
- 0
- 0
MM&FF May 2002 pg. 215-222. They made 19 more hp, and 10 more lbs-trq and beat them all the way across the board from 3000-6500rpm. That's 90% more than what you mentioned.
IntenseBlue said:MM&FF May 2002 pg. 215-222. They made 19 more hp, and 10 more lbs-trq and beat them all the way across the board from 3000-6500rpm. That's 90% more than what you mentioned.
on a 302/306 they make very similar power numbers. The 165's have a more useable powerband. Keep the 165's...
89white50 said:enough said...we arent talking what if's and bigger cubes. He will easily hit the 300 whp mark with those heads given the right cam. he would also hit the same mark if he used the TW's. He WANTS at least 300 whp guys! easily achieved by both heads...and he has purchased AFR's and those will do the job well. end of story!
IntenseBlue said:MM&FF May 2002 pg. 215-222. They made 19 more hp, and 10 more lbs-trq and beat them all the way across the board from 3000-6500rpm. That's 90% more than what you mentioned.
IntenseBlue said:I know what you were referring too. I know you were talking about a different article. No ****. I mentioned a different article, you wanted to know what it was. I told you what it was and now I'm lost as to what you're trying to say.
If you were referring to post #43, try looking at #42. He wanted to know what was going on with the page #s I listed. I informed him of what it was.
I know every combo is different and I'm pretty sure I stated that in one of my posts so as he wouldn't just go off of one article. You provided a head comparison, I provided another with the same heads being featured, which confirms my conclusion in the first sentence of this paragraph.
If I took your reply the wrong way, let me know. Not trying to be a dick, but the way I read it you were.
NcogNitto said:
Die thread! Die!
Join the hundred other AFR vs. TF threads in the StangNet search engine!!!
fiveoho said:$1515.00 shipped with valve / spring upgrade and 7/16s
vikingpower said:Am I reading that right? $1515?????
5spd GT said:vikingpower - Yep, that is what I paid and I don't regret it one bit. I like it done "right"...