- Feb 25, 2008
- 8
- 1
- 1
Today I took my gt40p's to a reputable machine shop to be checked, thermal cleaned, and a valve job. I plan on having these heads ported and polished, milled, springs, etc after I decide on a camshaft. The owner is supposed to call me in the next few days to discuss possible cam grinds, but I figured I would get your opinions as well . I am looking for close to 300whp(with the gt40ps, edelbrock performer intake, and the cam), but peak hp isnt as important to me as a nice torque curve as its mainly a street car. Id also like to have a nice lopey idle, without sacrificing driveability.
One of his machinists recommended a cam from comps xtreme energy line. I told him to write down the specs. Would this cam be a good choice for my combination?
*Duration @ .050 224/232
*Lift .555/.565
Thanks
One of his machinists recommended a cam from comps xtreme energy line. I told him to write down the specs. Would this cam be a good choice for my combination?
*Duration @ .050 224/232
*Lift .555/.565
Thanks