Can I break 450rwhp?

[jivepepper]

This will be my new set up do think I can break 450?
MMR mod 900 shortblock
stock heads and cams
stock intake and exhaust manifolds
75MM Prof. Product Plenum and TB
Vortech V1 with 2.8" Reichard racing pulley
Afm Powerpipe
Diy intercooler with 24x12x3" core with 3" pipe and inlet and outlets bar and plate design greddy rs by pass valve.
mac prochamber.
mac catback.
42lb injectors
03 Cobra tank and pumps.
extra stickers

 

[QDRHRSE]

It'll be pretty close. I say yes. If it was a Cobra I would definitely say yes.

 

[DropTopPony]

Yeah why not? Reeber has stock heads/cams and an S trim making 500rwhp.

 

[jivepepper]

Yeah why not? Reeber has stock heads/cams and an S trim making 500rwhp.

I don't know reeber? Is his exhaust manifolds and intake stock?

 

[DropTopPony]

stock PI intake, maybe LT's

 

[tomustang]

This will be my new set up do think I can break 450?
MMR mod 900 shortblock
stock heads and cams
stock intake and exhaust manifolds
75MM Prof. Product Plenum and TB
Vortech V1 with 2.8" Reichard racing pulley
Afm Powerpipe
Diy intercooler with 24x12x3" core with 3" pipe and inlet and outlets bar and plate design greddy rs by pass valve.
mac prochamber.
mac catback.
42lb injectors
03 Cobra tank and pumps.
extra stickers

all that crap is useless, but those stickers will put you near or maybe even over 500 to the wheelz

 

[tomustang]

Yeah why not? Reeber has stock heads/cams and an S trim making 500rwhp.

he's got blower cams

#
VT Engines 4.6L Forged Shortblock
#
MAC Ceramic coated Long Tube Headers with Off Road H pipe and MAC cat back system
#
Pro M 80MM MAF into Anderson Power Pipe
#
Vortech SQ Trim with 2.80 pulley (15 lbs. boost)
#
Anderson Motorsports Mr. Freeze Methanol Injection Kit
#
60 LB/Hr. Deka Siemens fuel injectors
#
70MM Accufab Throttle body and Plenum
#
PI intake and Heads with bee-hive comp cam springs
#
Houston Performance Blower Cams

 

[hotmustang331]

Schister (sp) made 601 RWHP with MPH blower cams, Forged MPH short block (284 I think), and all the boltons. (stock PI intake and heads)

But he had an intercooled novi 2000 and 17.5 pounds of boost. Just some insperation....

 

[reeber]

You guys talking about me?!

Just kidding... Yeah, I have blower cams... without the cams, he'd be close to 450... I would go with the 60lb injectors though... the intercooler is going to take a little boost away.. I got the methanol due to no loss of boost (and a lot cheaper)... yeah... the heads and intake manifold are stock..

 

[jivepepper]

he's got blower cams

Oh yeah I have 5 more MM of Tb dammit. lol