Let's start with the Omnifi. I think many have seen it, but here goes.
I started with this.
And finished with this.
Perfect routing of the cable. This necessitated desoldering the wires inside the circuit board, but it was only 5 simple wires and they were spaced far enough apart for my iron to get them.
Some finished pics.
Now you see it.
Now you don't.
Passenger side for comparison.
More.
I started with this.
And finished with this.
Perfect routing of the cable. This necessitated desoldering the wires inside the circuit board, but it was only 5 simple wires and they were spaced far enough apart for my iron to get them.
Some finished pics.
Now you see it.
Now you don't.
Passenger side for comparison.
More.