fuel pressure gauge

[xseler8]

I want to connect an Autometer FPG to the Schrader valve. 0-100lbs
Anyone have a part # or what do I need to complete this? (gauge & fittings)
for a 2002 GT 4.6...Thanks.
I did not purchase anything yet..I don't have the gauge

 

[jeffnoel]

You need the 1/16 male to 1/8 female adapter that autometer and others sell. Check the autometer website for a part number.

 

[01' Bullitt]

To make things a little easier heres the place where I got mine from. You will need the 90' degree elbow as well due to hood clearance issues if you are going electric.

http://www.steeda.ca/catalogue_product_type_432.asp

 

[2001sleeper]

I ordered my electric autometer gauge from MPH and it came with all the essentials. I have no 90 degree fitting and hood clearance is not an issue.

 

[Dope 97GT]

i got the fitting from autozone 9.99 for it

http://static.summitracing.com/global/images/prod/large/atm-3280_w.jpg

thats the part you need Autometer #3280

http://www.autometer.com/cat_accessorieslist.aspx?pid=10

thats for the electrical one the mechanical one can use the same fitting but you have to mount it under the hood I have the electronic one and its in the car works good too but like 175 off ebay

 

[01' Bullitt]

I ordered my electric autometer gauge from MPH and it came with all the essentials. I have no 90 degree fitting and hood clearance is not an issue.

For my Nexus fuel pressure sensor, hood clearance was an issue. I found out the hard way that not all Autometer products use the same sensors.